Instruction manual

MERLIN LEGEND Communications System Release 6.1 System Manager’s Guide
555-661-118
Issue 1
August 1998
Features and Applications
Page 4-26Features
4
Table 4–7. Continued
System Manager’s Functions and Features Type PROG Considerations Feature Name
Lines, line buttons, fixed-feature buttons (continued)
Specify the line selected when a user lifts the
handset or presses the Speaker button.
User SYS Automatic Line Selection and
Ringing/Idle Line Preference
Take an outside line out of service. Sys Mgr SYS Automatic Maintenance Busy
Copy line assignments, buttons, and features
from one extension to another.
User CNT See
System
Programming.
Assign lines that can be answered without
operator involvement.
User SYS Hybrid/PBX mode only Personal Lines
Adjust the ringing at an extension, including
one with a single-line phone or MFM.
User EXT
SYS
System manager only
for single-line, MFM
Ringing Options
Coverage
Allow Drop, Transfer, and Conference
buttons to access either host or system
features.
General SYS Behind Switch mode
only
Recall/Timed Flash
Assign a feature button to be a Service
Observing button.
User CNT Release 6.1 or later.
MLX telephones only;
not on a QCC.
Extension must be
programmed as a
Service Observer.
Service Observing
Continued on next page