Installation guide

If the Network
Interface
And Do This
has a 1-line jack
each jack is labeled Go on to “Test the Outside Lines,”
(RJ11-type) for
with its telephone page 13.
each outside
number
line
each jack is not
1.
Label each jack with its
labeled with its telephone number from the list
telephone number
provided by the local telephone
company.
2.
Go on to “Test the Outside
Lines,” page 13.
has 2-line jacks
each jack is labeled
1.
Plug a 2-line adapter (267C) into
(RJ14-type) for
with the telephone each jack.
the outside
numbers for its two
2.
Go on “Test the Outside Lines,”
lines
outside lines
page 13.
each jack is not
1.
Label each jack with the two
labeled with the telephone numbers for its out-
telephone numbers side lines from the list provided
for its two outside by the local telephone
lines company.
2.
Plug a 2-line adapter (267C) into
each jack.
3.
Go on to “Test the Outside
Lines,” page 13.
has a 50-pin
the interface is label-
Go on to the instructions for extend-
connector ed with the telephone
ing the network inteface to the jack
(RJ21-type) car-
numbers for the out-
field, immediately following this
rying the out- side lines
table.
side lines
the interface is not
1.
Label the interface with the
labeled with
telephone numbers for the out-
telephone numbers
side lines.
for the outside lines
2.
Go on to the instructions for ex-
tending the network interface to
the jack field, immediately
following this table.
8