Installation guide

CIB 3007
ADJUNCT POWER SUPPLY FOR 34-BUTTON DELUXE VOICE TERMINAL (D181282) (32811)
The Adjunct Power Supply (Figure 1) for the 34-Button Deluxe
Voice Terminal comes packed with a Z400F Adapter and a
7-foot cord (D6AP). The power supply converts 117-volt ac in-
put power to an output of 48-volt dc power.
2.
3.
4.
5.
POWER SUPPLY
(TOP VIEW)
OUTPUT JACK
(BOTTOM VIEW)
VOICE
TERMINAL
POWER
JACK
JACK
Figure 1
INSTALLATION
1.
Disconnect the modular terminal cord (D8W) from the
modular terminal jack (103A) or the extension cord lead-
ing to the control unit (see Figure 2).
Plug the Z400F Adapter into the modular terminal jack or
extension cord from which the modular terminal cord was
disconnected in Step 1 (see
Figure 2).
Plug the modular terminal cord into the voice terminal
jack on the Z400F Adapter (Figure 3).
Figure 3
Plug one end of the D6AP Cord into the power jack
(Figure 3) on the Z400F Adapter. Plug the other end into
the output jack on the power supply.
Plug the power supply into a 117-volt ac outlet.
Note:
The 117-volt ac outlet should not be controlled by
a switch.
MODULAR TERMINAL
JACK (103A)
MODULAR
TERMINAL
CORD (D8W)
TO CONTROL
Z400F
CORD
UNIT
ADAPTER
(D6AP)
–BUTTON DELUXE
EXTENSION
VOICE TERMINAL
CORD (DBAF)
POWER SUPPLY
(KS—22911, L1)
AC
OUTLET
Figure 2
Equipment manufactured by AT&T Technologies in the U.S.A.