Installation guide

TYPE II CARTRIDGES: AUDIO OPTIONS
A Type II cartridge provides connections for such features as Loudspeaker Paging,
Background Music, and Music-on-Hold. It is installed in the second slot on the right side of
the control unit.
Pictured below is the Music-on-Hold/Paging Cartridge. A Music-on-Hold Type II cartridge with
only the Music-on-Hold feature is also available; this cartridge has only the M1 and M2
terminals and the Music-on-Hold volume control.
M1 and M2 terminals: Connect to
a music source to provide Music-
on-Hold and, if desired,
background music on the paging
system.
1 and 2 terminals: Connect to the
paging system to signal when a
page is in progress (for example, to
turn off the background music).
T and R terminals: Connect to the
telephone input on your paging
system. The connection allows
users to access the paging system
via the intercom from any voice
terminal.
Paging Signal On/Off switch:
When set to On, a tone precedes
all paging announcements. When
set to Off, no tone precedes the
paging announcement.
Background Music volume
control: Used to adjust the volume
of background music. Turning it
clockwise increases the volume
and turning it counterclockwise
decreases the volume.
Music-on-Hold volume control:
Used to adjust the volume of
Music-on-Hold. Turning it
clockwise increases the volume
and turning it counterclockwise
decreases the volume.
CIB 2870: Music-on-Hold Cartridge Type II
CIB 2871: Music-on-Hold/Paging Cartridge Type II
11