Installation guide

A
B
C
RED
KEY
D
MOUNTING
PLATE
E
WALL MOUNT
MOUNTING
STUDS
KEYHOLES
Connections
Figure 4
1.
2.
3.
4.
Unplug the control unit power cord
from the wall outlet.
Plug the control unit power cord into
the “AC Output” outlet on the auxiliary
power unit.
Insert one end of the auxiliary power
cord into the jack labeled “Auxiliary
Power” on the control unit, and insert
the other end into the jack labeled
“Auxiliary Power” on the auxiliary
power unit.
Plug one end of the ac line cord into
the opening labeled “AC Input” on the
auxiliary power unit, and then plug the
other end into the ac wall outlet (see
Figure 5).
Figure 5
Instructions For
335A Auxiliary Power
Unit (3165)
CIB 2866
ISSUE 1
Copyright © 1984 AT&T Technologies
All rights reserved
Equipment manufactured by AT&T Technologies in the U.S.A.