Installation guide
CIB 2864
ISSUE 2
Instructions For
S102A Hands-Free Unit (3163)
(S102A) HANDS-FREE UNIT (3163)
Operation of the Hands-Free Unit (HFU) or speakerphone makes it possible to place and answer both
outside and intercom calls without using the handset of the associated voice terminal. The HFU can
only be used with 10- and 34-Button Voice Terminals.
INSTALLATION INSTRUCTIONS
1.
2.
Place the HFU on the desk or table near the voice terminal to which it will be connected.
Using the D8AC Cord supplied with the HFU, connect one end to the rear of the HFU; remove
the protective label covering the “OTHER” jack and connect the opposite end to the “OTHER”
jack on the bottom of the voice terminal (see Figure 1).
'LINE'
JACK
TO CONTROL UNIT
MODULAR TERMINAL
CORD (D8W)
D8AC
CORD
'OTHER'
JACK
10-BUTTON VOICE
TERMINAL
VOLUME
(BOTTOM VIEW)
CONTROL
HANDS-FREE UNIT
Figure 1
Copyright © 1984 AT&T Technologies
All rights reserved