Installation guide

REMOVE TO
PLUG IN
HANDS-FREE
UNIT
OR OTHER
TO 'LINE'
ACCESSORY
JACK
'OTHER'
JACK
'LINE'
JACK
CORD
D8W
SLOT
Figure 8
13.
14.
15.
16.
Position the back (or bottom) of the
voice terminal so the three terminal
mounting tabs (Figure 9) fit into the
terminal mounting slots.
Gently slide the voice terminal down-
ward so the three tabs fit into the
smaller part of the corresponding
mounting slots (see Figure 10).
Plug the loose end of the handset
cord into the handset.
The installation is complete.
THREE
VOICE TERMINAL
MOUNTING TABS
10 -BUTTON
'LINE' JACK
VOICE
UNIT
TERMINAL
(BACKVIEW)
'OTHER'
JACK
REMOVE TO
PLUG IN
HANDS-FREE
UNIT
OR OTHER
ACCESSORY
Figure 9
Instructions For
201A 10-Button Voice
Terminal Wall Mount
(32001)
CIB 2856
ISSUE 2
Figure 10
Equipment manufactured by AT&T Technologies in the U.S.A.
Copyright © 1984 AT&T Technologies
All rights reserved