User`s guide

Troubleshooting
If you have a problem with your wireless phone, you may be
able to solve it by following the procedures listed here. If you
cannot resolve a problem using these procedures, call for help
as described on the front panel of this Quick Reference.
Symptom Possible Causes
Possible Solutions
After plugging the
For single radio module
radio module or
installations only:
carrier assembly into
an electrical outlet,
■ Radio module is plugged ■ Plug the radio module’s
the radio module’s
into an electrical outlet
power cord into an outlet
POWER LED does
controlled by a switch.
not controlled by a switch.
not light.
■ Radio module’s power
■ Unplug the radio module’s
cord is not inserted
AC adapter from the
properly.
electrical outlet.
Disconnect then carefully
re-insert the power cord
into the left side of the
radio module. Plug the
radio module’s AC adapter
back into the electrical
outlet.
■ Radio module’s power
■ Call for help.*
cord is defective.
For carrier assembly
installations:
■ Radio module is
■ Call for help.*
inoperable.
After plugging the
Radio module or carrier
Call for help.*
radio module or
assembly is inoperable.
carrier assembly into
an electrical outlet,
the PASS LED does
not light.
* See front panel of this Quick Reference.
4