User`s guide

Handset Display
➀
➁
➂
➃
➄
➅
➆
➇
➈
18 indicates Local Test Mode; 1 through 10 are used in
Wireless Test Mode.
P indicates programming mode.
MUTE indicates handset microphone is turned off after
pressing [ Mute ].
T indicates handset is in Wireless Test Mode.
MSG indicates a message has been deposited in your
voice mailbox.
Line Status Indicators. See below.
BATT indicates low battery voltage, Handset also emits 2
beeps. See “Troubleshooting” for more information.
RANGE indicates handset is out of range or almost out of
range. Handset also beeps. See “Troubleshooting” for more
information.
ON indicates handset has been turned on after pressing [ On/Off ].
Line Status Indicators
There are six line status indicators; each one corresponds to
a specific outside line/programmable/intercom/drop button,
The indicators show either a triangle or a rectangle, signifying
activity as follows:
PARTNER Systems
Arrow ( ▲ or ▼ ) indicates activity at YOUR extension.
Rectangle ( ) indicates activity at ANOTHER extension.
All Other Systems
Rectangle ( ) indicates activity at YOUR extension.
Arrow ( ▲ or ▼ ) indicates activity at ANOTHER extension.
Call Alerter
If a call comes in while the phone is idle, the handset rings.
If you are already on a call, the handset chirps.
2