User`s guide

MDW 9000 Compatibility
Programming System Features
PARTNER Systems:
■ PARTNER II and PARTNER Plus system buttons should be
assigned as follows; 1, 2, 3, and 4 are line or feature buttons
(for a PARTNER system, buttons 1 through 4 are line only):
1
2
3
18 PMUTE
ON
MSG
RANGE BATT
4
MERLIN Systems:
■
■
■
■
■
■
■
It is recommended that you use MERLIN 206/410/820
systems installed with Feature Package 2 with your wireless
phone.
On MERLIN II and MERLIN LEGEND systems, you must
connect your wireless phone to an available jack on either a
408 outside line/analog telephone module or a 008 analog
telephone module.
.
You must disable the Voice Announce feature. This phone
does not have a speaker function.
The wireless phone should not be assigned to a paging
group.
To program the Ringing Option feature, use the “arrow” and
“rectangle” indicators in the display as the equivalent of red
and green LEDs, respectively.
For MERLIN II system users, if you program an Auto Intercom
button, idle line preference must be set to intercom.
If any of your incoming lines has the call waiting feature,
program the Recall feature on one of the programmable
buttons and press it before you pick up a waiting call. You
can dial #50 before you pick up a waiting call on the follow
ing: MERLIN 206/410/820 systems only with Feature Package
2, and all MERLIN Plus, MERLIN
II and MERLIN 1030/3070
systems. Pressing [
On/Off ] will disconnect the call.
13