Specifications

Remote Programming
The system permits programming from a remote location using an auxiliary
device called the Remote Administration Unit (RAU). Remote programming
requires the installation of two RAUs—one at your site and one at the location
from which the programming is to be done. For more information on remote
programming, see the PARTNER Communications System Remote
Administration Unit Installation and Use guide.
Telephone Programming Options
System telephones are ready to use when they are installed, but they can be
customized to meet the needs of your business and individual users. This
customization is accomplished through Telephone Programming.
Automatic Line Selection
When a user lifts the telephone’s handset or presses [ Spkr ], the system chooses
an idle line automatically. Automatic Line Selection determines the order in
which the system looks for an idle line. You can set the system to look for lines
in any desired order. For standard phones or for any phone used mainly to call
other extensions, select an inside (intercom) line first.
Extension Name on Display
With Extension Name Display, users can assign a name (up to 20 characters
long) to their extension. Then, when those users make an intercom call, group
call, or transfer a call, their name and extension number appears on the display
phone receiving the call. Similarly, users receiving a transfer return call see the
name and extension number of the person assigned to the extension that did
not answer the transferred call.
Line Ringing
Line Ringing defines when each outside line rings at a phone. For each line at
an extension, you can specify Immediate Ring, Delayed Ring (phone rings after
a 20-second delay), or No Ring.
Personal Speed Dialing
Personal Speed Dial numbers are outside phone numbers that a user dials by
pressing [ Feature ] (or [ # ] on a standard phone) plus a two-digit code. Unlike
System Speed Dial numbers, which are available to all users in the system,
Personal Speed Dial numbers are available only at the extension for which they
are programmed. Users can store up to 20 Personal Speed Dial numbers.
Programming 2-17