Specifications

Hospitality Features
The following hospitality features are for special applications, such as the Bed
and Breakfast and Hotel/Motel industries. With both features, the receptionist at
extension 10 optionally can use the Intercom Autodialer to specify an extension.
■
■
Outgoing Call Restriction Button (#114) lets you program a button on
the system phone at extension 10 to change an extension’s current
Outgoing Call Restriction setting without entering System Programming
mode. For example, after a guest’s departure, a hotel manager can
change the No Restriction setting of the guest room phone to Inside Only
so outside calls cannot be made from the phone after the guest checks
out.
Wake Up Service Button (#115) lets you program a button on the
system phone at extension 10 to be used for scheduling wake-up or
reminder calls for specified system extensions.
Using System Programming
System Programming changes settings for the system as a whole, or for
individual lines or extensions. You can also use System Programming to set up
dialing restrictions, define groups, or set up auxiliary equipment. Refer to the
filled-out System Planner when you are changing system settings, and be sure
that any changes in programming are recorded there.
The Programming Overlays
System Programming requires a Programming Overlay placed over the dialpad
of the system display phone at extension 10 or 11. (Overlays are provided with
the system documentation. Replacements can be ordered from the AT&T
GBCS Publications Fulfillment Center. See “Reference Materials” under
“Product Ordering Information” in Appendix B.) Figure 2-3 on page 2-13
illustrates the Programming Overlays for the PARTNER-34D and PARTNER-18D
phones.
2-12 Programming