Specifications

System Programming Quick Reference
Place the Programming Overlay on the dialpad of the system display phone at extension 10 or 11
TO START SYSTEM PROGRAMMING TO END SYSTEM PROGRAMMING
TO CYCLE THROUGH SYSTEM
TO CYCLE THROUGH AVAILABLE
PRESS [ Feature ] [ 0 ] [ 0 ]
PRESS [
Feature ] [ 0 ] [ 0 ]
PROGRAMMING PROCEDURES SETTINGS
TO USE A SPECIFIC PROCEDURE
PRESS [ Next Procedure ] or [ Prev Procedure ]
PRESS [
Next Data ] or [ Prev Data ]
PRESS [
System Program ]
DIAL [ # ] and three-digit procedure code
NOTES: Procedures #399, #609,
TO RETURN TO FACTORY
PRESS [ System Program ]
and #728—shown below in dashed
SETTING
Example: [ # ] [ 1 ] [ 0 ] [ 1 ] for System Date
boxes—are skipped when cycling.
PRESS [ Remove ]
System
Lines
SYSTEM DATE
(p. 5-135)
DIAL #101
DIAL the date in MMDDYY form.
SYSTEM DAY
(p. 5-136)
DIAL #102
DIAL 1 = Sunday ✔
5 = Thursday
2 = Monday
6 = Friday
3 = Tuesday
7 = Saturday
4 = Wednesday
SYSTEM TIME
(p. 5-142)
DIAL #103
DIAL the time in HHMM 24-hour
military format
NUMBER OF LINES (p. 5-108)
*See IMPORTANT below
DIAL #104
DIAL two digits (01–12) for the number
of outside lines to be assigned to
every extension
✔ 2 per 206 module
✔ 4 per 400 module
TRANSFER RETURN RINGS
DIAL #105
(p. 5-150)
DIAL one digit (0–9) for the number
of rings before the call returns
✔ = 4 rings
0 rings = no return
RECALL TIMER DURATION
DIAL #107
(p. 5-120)
DIAL two digits (01–80) to set the
length of a switchhook flash
✔ = 18 (450 msec)
ROTARY DIALING TIMEOUT
DIAL #108
(p. 5-122)
DIAL 1 = 4 sec
2 = 8 sec ✔
3 = 12 sec
OUTSIDE CONFERENCE DENIAL
DIAL #109
(p. 5-113)
DIAL
1 = Allowed ✔
2 = Disallowed
OUTGOING CALL RESTRICTION
BUTTON
(p. 5-111)
DIAL #114
DIAL 1 = Assigned
2 = Not Assigned ✔
3 = Select Button then press
a programmable button
WAKE UP SERVICE BUTTON (p. 5-160)
DIAL #115
DIAL 1 = Assigned
2 = Not Assigned ✔
3 = Select Button then press
a programmable button
VMS COVER RINGS
DIAL #117
(p. 5-153)
DIAL one digit (1–9) for the number
of rings before the call is sent to
the voice messaging system
✔ = 3 rings
RING ON TRANSFER
(p. 5-121)
DIAL #119
DIAL 1 = Active ✔
2 = Not Active
DIAL MODE
(p. 5-36)
DIAL
#201
DIAL a line number (01–12)
DIAL 1 = Touch-Tone ✔
2 = Rotary
PRESS [ Next Item ] to program another
line
HOLD DISCONNECT TIME
DIAL #203
(p. 5-74)
DIAL a line number (01–12)
DIAL
1 = Long (450 msec) ✔
2 = Short (50 msec)
PRESS [ Next Item ] to program another
line
GROUP CALL DISTRIBUTION
DIAL #206 (p. 5-62)
DIAL a group number (1–6, 7 for
VMS)
DIAL a line number (01–12)
DIAL 1 = Assigned
2 = Not Assigned ✔
3 = VMS Line Cover (only for
hunt group 7)
PRESS [ Next Item ] to program another
line
LINE COVERAGE EXTENSION
DIAL #208 (p. 5-88)
DIAL a line number (01–12)
DIAL an extension number (10–33)
PRESS [ Next Item ] to program another
line
PRESS [ Remove ] to unassign
ownership
For Centralized Telephone
Programming, see previous
pages
IMPORTANT: The Number of Lines procedure changes line Assignment
(#301), Line Access Restriction (#302), Automatic Line Selection, and Line
Ringing to factory settings. To change line assignments without affecting other
settings, use Line Assignment (#301).