Specifications

SMDR Record Type (#608)
Description
Call Reporting (often referred to as Station Message Detail Recording or SMDR)
provides detailed tracking of telephone usage in a printed report. This System
Programming procedure allows you to specify whether all calls or outgoing calls
only are to be included on call reports.
Related Features
■
■
■
■
■
■
The date and time that appear on call reports are determined by System
Date (#101) and System Time (#103).
The call report page header prints in the Display Language (#303)
specified for extension 10.
If Account Code Entry (optional or forced) is used to enter an account
code for a call (for example, to charge calls to specific departments or
projects), the account code prints on the call report. If there are entries in
the Forced Account Code List (#409), only valid account codes and any
other entered digits up to 16 print on the call report.
Marked System Speed Dial Numbers appear on the call report as Fnnn,
where nnn is the Speed Dial code.
You can use SMDR Output Format (#610) to identify whether a maximum of
15 or 24 digits is printed for dialed numbers on the call report.
For instructions on notifying the system that the printer has been aligned to
the top of a new page, see SMDR Top Of Page (#609).
Considerations
This feature requires special hardware and/or software. For more information,
see “Call Reporting Devices (SMDR)” in Chapter 4.
Valid Entries
1 = All Calls (outgoing and incoming) ✔
2 = Outgoing Only
Programming
To identify the type of calls to include for call reporting:
1.
Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 6 ] [ 0 ] [ 8 ].
2.
Press [ Next Data ] until the appropriate value displays.
3.
Select another procedure or exit programming mode.
5-128 SMDR Record Type (#608)