Specifications

Programming
To program a Manual Signaling button:
1.
Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2.
Enter the number of the extension to be programmed with this feature.
3.
Press a programmable button.
4.
Press [
Feature ] [ 1 ] [ 3 ].
5.
Dial the two-digit extension number of the target extension. For example, to
identify extension 22 as the target extension, press [ 2 ] [ 2 ]. (Enter [ ★ ] before
the extension number if you want to use the button for voice signaling.)
6.
Program another button for this extension or exit programming mode.
Using
■ To beep the target extension:
1. While the handset is in the cradle, press the programmed button.
The extension beeps for as long as the button is pressed.
■ To ring or voice signal the target extension:
1. Lift the handset or press [ Spkr ].
2. Press [ Intercom ].
3. Press the programmed button.
■ To transfer a call to the target extension:
1. While active on the call, press [ Transfr ].
2. Press the programmed button.
5-98 Manual Signaling (F13XX or F13*XX)