Specifications
Programming
To assign a name to an extension:
1.
2.
3.
4.
5.
6.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
Central Tel Program
].
Enter the number of the extension to be programmed. For example, to
program extension 12, press [
1
] [
2
].
Press left [
Intercom
]. For extension 12, the display reads:
12 Enter Extension Name
If a name was assigned previously to this extension, that name displays instead.
Enter the two-digit code for each character you want to enter. (See Table 5-1
for codes.) For example, to enter the name Andy, press [
2
] [
1
] [
6
] [
2
] [
3
] [
1
]
[
9
] [
3
]. The display reads:
12 ANDY
If you make a mistake, you can press [ Mic/HFAI ] to clear the display. Repeat
Step 4 to enter the correct name.
Program a button for this extension or exit programming mode.
5-54 Extension Name Display