Specifications

Exclusive Hold (F02)
Description
This feature is available only on system phones.
This feature prevents other extensions from picking up outside calls placed on
hold at a specific extension with a system phone.
Related Features
You can use the Hold button to put calls on regular hold (any extension can pick
up the held call).
Considerations
■ You can program an Exclusive Hold button on a system phone to use the
feature with one touch.
■ For system phones, if a call is left on hold for longer than one minute, the
extension at which the call is held generates a short Hold Reminder Tone.
This tone sounds once every minute until the held call is retrieved, or until
the caller hangs up.
Programming
To program an Exclusive Hold button:
1.
Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2.
Enter the extension number to be programmed with this feature.
3.
Press a programmable button.
4.
Press [
Feature ] [ 0 ] [ 2 ].
5.
Program another button for this extension or exit programming mode.
Using
While active on an outside call on a system phone:
1. Press the programmed button or press [ Feature ] [ 0 ] [ 2 ] to put the call on
Exclusive Hold.
The green light next to the line or [ Intercom ] button flutters. At all other
extensions, the line appears busy (steady red).
2.
To retrieve the call, press the line or [ Intercom ] button on which the call is held
and lift the handset or press [
Spkr ].
You can pick up a call on Exclusive Hold only at the extension on which it
was put on Exclusive Hold.
5-52 Exclusive Hold (F02)