Specifications
Do Not Disturb (F01)
Description
This feature is available only on system phones.
This feature lets a system phone user press a programmed button to prevent
incoming calls for the extension from audibly alerting (lights still flash). When Do
Not Disturb is on, outside callers hear ringing while inside callers hear a busy
signal. This feature is recommended only if someone answers outside calls for
your extension when you do not answer them.
Related Features
Users with Automatic VMS Cover (#310) Assigned or with VMS Cover turned
on can activate Do Not Disturb to Send All Calls immediately to their voice
mailbox.
Considerations
■ This feature requires a button with lights. When the Do Not Disturb feature is
on, the light is also on, indicating that the phone will not ring.
■ Use this feature when you do not want the PARTNER Attendant or the voice
messaging system to transfer calls to you.
■ Use this feature if you are assigned to a Hunt Group and you leave your
desk, so calls to the Hunt Group will skip your extension and ring
immediately at the next available extension in the group.
■ To avoid missing calls when this feature is not needed, turn it off.
■ If Do Not Disturb is active at a doorphone alert extension, the person at the
doorphone hears signaling, but the alert extension is not signaled.
■ Unanswered calls that are transferred from an extension with Do Not Disturb
active will ring at that extension if they transfer return.
Programming
To program a Do Not Disturb button:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
Central Tel Program
].
2.
Enter the number of the extension to be programmed with this feature.
3.
Press a programmable button with lights.
4.
Press [
Feature
] [
0
] [
1
].
5.
Program another button for this extension or exit programming mode.
Using
From a system phone, press the programmed button to turn Do Not Disturb on;
press it again to turn it off. Use the button like a switch—when the light is on, Do
Not Disturb is on.
Do Not Disturb (F01) 5-47