Installation manual

          
! "    #$%$  & ' ;

  
 
(  
.  " . 
 , "    
5

 !" 
Support of the 1600 DSL module, a module that contains up to 16 lines on one line
jack.
Caller ID name and number appear on display telephones while a call is ringing.
Newly designed [5-slot] carrier, requiring no cover.
Dial plan increased to support 48 stations.
!" 
Support of the 012E module, a module that increases the maximum extension
capacity to 48.
Support of the Endeavor 362EC module, enabling PARTNER® Endeavor
telephones to function with PARTNER ACS.
Remote administration of the 1600 DSL module is available through the
PARTNER ACS R6.0 PC Administration software. For more information, see the
PARTNER® ACS R6.0 PC Administration Getting Started.
With the PARTNER ACS R6.0 PC Administration software, the content of the PC
Cards that are installed in the PARTNER ACS processor module as well as the
modules installed in the carrier are displayed in an inventory screen. For more
information, see the PARTNER® ACS R6.0 PC Administration Getting Started.
Firmware upgrade capability of the 1600 DSL and 012E modules is available by
using a Remote Access PC Card or a Backup/Restore PC Card that is configured
for the firmware upgrade.
% !" 
Support of the T1 module, a module that contains up to 16 lines on one line jack.
Support for Direct Inward Dialing (DID) service for PARTNER systems that have
a T1 module. Note: You must use the PARTNER ACS R6.0 PC Administration
software to administer the DID service.
Remote Call Forwarding to allow users to forward all intercom, transferred, and
outside calls from their extensions to an outside telephone number they specify.
Cell Phone Connect to allow users to forward all intercom, transferred, and outside
calls from their extensions to an outside telephone number they specify and
simultaneously have the PARTNER system also ring their extensions. Depending
on how the user’s coverage is administered (for example, they have a PARTNER
Messaging system), the call can go to coverage. Cell Phone Connect is available
only on PARTNER systems that have a T1 module.
Administrable Hold Reminder Tone to allow you to set the length of time calls
must be on hold before the Hold Reminder Tone alerts the users.
Caller ID name and number appear on display telephones when a call is transferred
from the Automated Attendant, Voice Messaging System, or Direct Extension
Dial.
Call timer on display telephones now shows the entire time that a call has been in
progress on the PARTNER system (including on hold and transferred).
The number dialed will now remain on display telephones until the user receives
another call.
All Lines Busy Event to report when all lines in the PARTNER system were busy.
This feature is available only in the PARTNER ACS R6.0 PC Administration
application.
Electronic serial numbers for the PARTNER ACS Processor Module and the
PARTNER 308EC. This information can be viewed using the PARTNER ACS
R6.0 PC Administration application.