Instruction manual

System Programming
Summary: Clock Synchronization
Programming
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System technician; system manager
Key, Hybrid/PBX
Not required
System Form 3e, Outside Lines-BRl Options
The first 100D module or 800 CO-BRI port found
sequentially in the control unit is the default primary
loop clock.
Primary, Secondary, Tertiary
No
No
LinesTrunks ➜ More ➜ ClockSync ➜ Select type
of clock source ➜ Dial slot no. ➜ Enter ➜ Dial port
no. ➜ Enter ➜ Exit ➜ Exit
F4 ➜ PgUp ➜ F6 ➜ Select type of clock source ➜
❑ ❑
❑
Type slot no. ➜ F10 ➜ Type port no. ➜ F10 ➜ F5 ➜
❑ ❑
F5
❑
Clock Synchronization 5-7