Instruction manual

System Programming
Service Profile Identifier
Entering
A Service Profile Identifier (SPID) is a unique identifier that associates a Basic
Rate Interface (BRI) line on the MERLIN LEGEND system with a particular User
Service Order Profile (USOP). The USOP contains the information needed by the
central office (CO) to provide BRI service to the line. Each SPID is provided by
the CO at subscription time. The SPID is a string of digits (O-9) that cannot
exceed 10 digits in length and can have some or all of a user’s Directory
Number as a subset.
Follow this procedure to program a SPID for every BRI line in the MERLIN
LEGEND system. If a SPID is not programmed for a line, the system considers
that BRI line inactive.
Programming
Console: Press Menu ➜ Sys Program ➜ Exit
PC/SPM: Type SPM ➜ Press any key ➜ F1 ➜ F5
❑ ❑
Exiting Without Changes
To exit from any screen without making changes, select Exit on the console or
press F5 on the PC before saving your entry or menu selection.
Summary Service Profile Identifier
Programmable by System technician; system manager
Mode Key, Hybrid/PBX
Idle Condition
Required
Planning Form
System Form 3e, Outside Lines-BRl Options
Factory Setting
None
Valid Entries
Maximum of 10 digits in length, using digits O through 9
Inspect
No
Copy Option
No
Console Procedure
Lines Trunks ➜ More ➜ BRI ➜ ServProfId ➜
Dial line no. ➜ Enter ➜ Dial SPID ➜ Enter ➜ Exit
➜ Exit
PC Procedure
Service Profile Identifier 5-3