Instruction manual

Features
All-Call Privacy Not Activated
When the All Call Privacy feature is not activated, the CPN/BN for the BRI line is
.
sent to the destination station when a call is placed on the line. Follow these
steps to use Per-Call Privacy to override All-Call Privacy and prevent the
CPN/BN for the BRI line from being sent for the next call only:
1. While the handset is on-hook, press the Personal Line button or Pool button
associated with the BRI line on which the All-Call Privacy feature is assigned.
The red LED next to the line button lights, indicating that the line button
will be used to make the call.
2. Lift the handset or, if the telephone is equipped with a speakerphone, press
the Speakerphone button.
The green LED lights.
You hear a dial tone.
3. Dial the feature code assigned by the local telephone company to activate
Per-Call Privacy.
You hear the confirmation tone (three-burst tone) followed by a dial tone.
4. Dial the number for your outside call.
The CPN/BN associated with the BRI line used to make the call is not sent
to the destination station for the current call only.
Considerations and Constraints
Since some BRI lines have the All-Call Privacy feature activated while others
have the All-Call Privacy feature not activated, stations should be assigned
Personal Line buttons that have the same All-Call Privacy status. This way the
user always knows whether using the Per-Call Privacy feature allows or prevents
the CPN/BN from being sent to the destination station.
3-4 All-Call Privacy/Per-Call Privacy