Instruction manual

Maintenance
Port Screens—Digital Subscriber
Lines
The ports on the 800 CO-BRI module are linked to Digital Subscriber Lines
(DSLs). Therefore, a DSL option has been added to the Port menu. By choosing
DSL from this menu, the user can check the status of, busy-out, restore, or check
the error events for the DSL port.
Follow the screens and instructions below to get to the DSL menu.
Step
Screen Display
Procedure
1
2
3
Port:
Make a selection
Line /Trunk
Modem
Station
B-Channel
RS232 Port1
DSL
RS232 Port2
Exit
DSL :
Enter DSL (sspp)
Backspace
Exit
Enter
DSL
xxxx:
Make a selection
Status
Busy Out
Restore
Error Events
Exit
From the Port menu, select DSL.
Enter the DSL slot and port number
and select Enter.
NOTE:
The slot number ranges from 01 to 17;
the port number ranges from 01 to 08
for the 800 CO-BRI module.
At the DSL port menu, select the
option you want, and proceed as you
would for any other port on the system
(see the Maintenance and
Troubleshooting Guide, (555-620-
143).
6-16 Port Screens-Digital Subscriber Lines