User Guide

26
Telephone operation
Handset locator
You can use the handset locator feature to find
misplaced handsets.
To start the paging tone:
Press /HANDSET LOCATOR on the telephone
base to start the paging tone on all handsets for
60 seconds.
To stop the paging tone:
Press PHONE/FLASH, /SPEAKER,
OFF/CANCEL or any dialing key (0-9, or #) on
the handset(s).
-OR-
Press /HANDSET LOCATOR on the
telephone base.
-OR-
Place the handset in the telephone base or charger.
notes:
If you press MUTE/DELETE on a handset, the ringer of that handset is silenced but the paging
tone continues on the other handsets.
If a handset is on a call (intercom call or outside call), or out of range, that handset does not
beep when paged.
Web address
You can use the web address feature to view the AT&T website address.
Press MENU/SELECT in idle mode.
Press CID or DIR to scroll to Web address, then
press MENU/SELECT. The screen shows the AT&T
Website address.
•
•
•
•
•
•
1.
2.
www.telephones.
ECO
att.com
ECO
TONE