Quick start guide E598-2 5.
Getting started UP Quick reference guide LEFT Handset CENTER RIGHT DOWN MENU/SELECT Press to display the menu. Once in the menu, press to select an item or save an entry or setting. Press or to scroll up or down while in menus. While entering names or numbers, press or to move the cursor to the left or right. CID Press to display caller ID information. PHONE/FLASH Press to make or answer a call. During a call, press to receive an incoming call if call waiting is activated.
Getting started Battery installation & charging After battery installation, the battery may have enough charge to allow for some calls. For best performance, place the handset in the charger or telephone base and allow it to charge for 16 hours before use. You can keep the battery charged by returning the handset to the charger or the telephone base after each use. When the battery is fully depleted, a recharge takes about 12 hours.
Getting started Adding and registering handsets Before using a new E598-2 handset, you must register it with your E5901/E5902B/E5903B/E5911/E5912B/E5913B/E5914B/ E5921/E5922B/E5923B/E5924B/E6001/E6002B/E6012B/E6013B/ E3813B or E6014B telephone base (purchased separately). The E5901/E5902B/E5903B/E5911/E5912B/E5913B/E5914B/E5921/ E5922B/E5923B/E5924B/���������������������������������� E6001/E6002B/��������������������� E6012B/E6013B/E3813B or E6014B can accommodate up to four cordless handsets.
Getting started Adding and registering handsets NOT REGISTERED Before using a new E598-2 handset, you must register it with the telephone base. Each handset must be registered seperately. To register a handset to your telephone base PRESS HNDST LOC 4 SEC ON BASE PLEASE WAIT... HS X REGISTERED 12:00PM When first purchased, the expansion handset will show NOT REGISTERED on the screen. The new handset may need to be charged for five minutes before registering to the main telephone base. 1.
Getting started Replacing a handset You may need to de-register your handsets if: You have the maximum number of registered handsets (four) and you need to replace a handset. - OR You wish to change the designated handset number of your registered handsets. You must first de-register ALL the handsets, and then re-register ALL the handsets you wish to use. Please read carefully through all the instructions on this page before beginning the de-registration process. To de-register all handsets 1.
www.telephones.att.com Copyright © 2007 Advanced American Telephones. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Knowledge Ventures, licensed to Advanced American Telephones. Printed in China. Issue 2 03/07.
