User`s manual

Appendix

System

does not

respond

to remote

commands.

• Make sure to enter your remote access code correctly (see page

39).

• Make sure you are calling from a touch tone phone. When you

dial a number, you should hear tones. If you hear clicks, the

phone is not a touch-tone telephone and cannot activate the

answering system.

• The answering system may not detect the remote access

code while your announcement is playing. Try waiting until the

announcement is over before entering the code.

• There may be noise or interference on the phone line you are

using. Press dial pad keys firmly.

System does

not record

message.

• Make sure answering system is on (see page 31).

• Make sure announcement only is off.

Announcement

message is

not clear.

• When you record your announcement, make sure you speak in a

normal tone of voice, about 9 inches from the base.

• Make sure there is no background noise (TV, music, etc.) while

you are recording.

Troubleshooting