User's manual E5828B/E1828B 5.
Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety instructions on pages 56-58 of this manual. Please thoroughly read the user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268. Model # E5828B/E1828B Product name: 5.
You must install and charge the battery before using the telephone. STOP! See page 7 for easy instructions. For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268.
User's manual E5828B/E1828B 5.8 GHz corded/cordless telephone/answering system with caller ID/ call waiting Table of contents Getting started Answering system operation Quick reference guide .....................2 Parts checklist .....................................4 Telephone base installation .........5 Battery installation & charging ...7 Wall mounting.....................................8 Belt clip & optional headset .............9 Answering system operation .... 38 Day & time announcements.......
Getting started Quick reference guide Cordless handset SELECT/TRANSFER DIR /VOLUME+ Press to store a programming option (pages 10-12), or to create a directory entry in memory (page 25). During a call, press to transfer a call between cordless handsets (page 19). When phone is idle, press DIR to display directory entries (page 29). While entering letters in names, press to advance or press twice to enter space. While programming, press to change menu item or value (pages 10-12).
Getting started Quick reference guide Telephone base RINGER VOLUME: CONTRAST: Press to adjust Set switch on side of base (off, low, high). (page 14) • screen contrast. • • • • • INTERCOM/CID DEL: Press to delete displayed caller ID entry (page 34). While phone is idle, press to page handset (page 16), or press and hold to delete all caller ID entries (page 35). • MENU: Press to customize the telephone’s operation (page 13).
Getting started Parts checklist Save your sales receipt and original packaging in case it is necessary to ship your telephone for warranty service. Check to make sure the telephone package includes the following. The model number of your telephone can be found on the label located on the bottom of the telephone base. User's manual Quick start guide E5828B/E1828B 5.8 GHz corded/cordless telephone/answering system with caller ID/ call waiting E5828B/E1828B 5.
Getting started Telephone base installation Choose a central location close to a telephone jack and a power outlet not controlled to a wall switch. The telephone base can be placed on a flat surface or mounted on a standard wall plate. For optimum range and better reception, place the telephone base in a high and open location.
Getting started Telephone base installation 1. Plug the small end of the larg- er power adapter into the power jack at the bottom of the telephone base. 2. Plug one end of the telephone line cord into the telephone jack at the bottom of the telephone base. 3. Route cords through slots. DSL filter (Optional for DSL users, see number four in the note section, below.) Telephone line cord 4. Plug the large end of 5.
Getting started Battery installation & charging After installing the battery, you may be able to make or receive short calls. For best performance, place the handset in charger to charge for 16 hours before use. You can keep the battery charged by returning the handset to charger after use. When the battery is fully depleted, a recharge takes about 12 hours. The average talk time on a fully charged battery is about eight hours, and the standby time is approximately three days.
Getting started Wall mounting The telephone base can be installed on any standard wall-phone outlet as shown below. Choose a location away from electronic equipment such as personal computers, computer routers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. 1. Connect the telephone line cord and power adapter to the jacks on the bottom of the telephone base. 2. Grasp and squeeze to open highed wall mount, then rotate wall mount and lock in place. 3.
Getting started Belt clip & optional headsett Install belt clip as shown below if desired. To release belt clip from handset, lift one side of the belt clip out of the notch. Snap belt clip into notches on both sides of handset. For hands-free telephone conversations, use any industry standard 2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset. To order an AT&T 2.5 mm headset, visit our website at www.telephones.att.com or call 1 (800) 222-3111.
Telephone operation Handset settings You can change settings to program how the cordless handset works. Each cordless handset operates individually from the other handsets. The ringer sound, ringer volume, date & time dial mode and language must be programmed separately for each cordless handset. • Press MENU/CHAN, then use the CID/-VOLUME or DIR /VOLUME+ buttons to scroll to the feature to be changed. Press SELECT/TRANSFER to select the displayed item.
Telephone operation Handset settings Set handset date & time The handset displays the date & time when idle. You can set the time manually, or you can allow it to be set automatically with incoming caller ID information. The time will be set automatically only if you subscribe to caller ID service provided by your local telephone company (page 30). • Press MENU/CHAN to begin programming. • Press CID/-VOLUME or DIR /VOLUME+ until t h e s c re e n d i s p l a y s DAT E / T I M E .
Telephone operation Handset settings Set handset ringer tone This feature allows you to choose one of 4 ringing tones (1-4) or turn the ringer off. Use CID/-VOLUME or DIR /VOLUME+ button to hear an example of each ringer tone, then press SELECT/TRANSFER to select the one you prefer. • Press MENU/CHAN to begin programming. • Press CID/-VOLUME or DIR /VOLUME+ until the screen displays RINGER: and setting. • Press SELECT/TRANSFER to change current setting.
Telephone operation Base settings You can change settings to program how the telephone base works. Follow the steps below to program the telephone base. To stop at any time, press CLEAR. If the telephone rings, programming stops automatically so you can answer the call. Choose telephone base language At this menu you can select the language used in all menus and screen displays. • Press MENU to begin programming. LANGUAGE • Press CID or DIR LANGUAGE.
Telephone operation Base settings Choose base ringer volume The base ringer volume can be set to OFF, LOW, or HI, by adjusting the switch on the left side of the telephone base. This switch affects only the telephone base ringer volume, the handset ringer volume remains unchanged. Contrast adjustment (telephone base only) There are four levels of contrast on the screen of the telephone base which can be adjusted to suit different viewing angles for both desktop use or wall mounting.
Telephone operation Basic cordless handset operation Making and answering calls To answer an incoming call, press PHONE/FLASH (or any key except OFF/CLEAR, CID/-VOLUME or DIR /VOLUME+). If you have caller ID service, the caller’s number and name will appear on the display screen after the first or second ring (see page 30 for caller ID features and options). To make a call, press PHONE/FLASH, then dial a number. Press OFF/CLEAR or place in charger to hang up.
Telephone operation Basic base operation Making and answering calls Lift corded handset, or press SPEAKER SPEAKER 00:09 12345678901 To answer a call, lift the corded handset, or press SPEAKER. If you have caller ID service, the caller’s number and name will appear on the display screen after the first ring (see page 30 for caller ID features and options). To make a call, lift the corded handset, (or press SPEAKER) then dial a number. To preview numbers before dialing, first enter telephone number.
Telephone operation Options while on calls To adjust volume Volume Flash Press CID/-VOLUME or DIR /VOLUME+ buttons on the cordless handset or the VOLUME button on the telephone base to adjust listening volume. Call waiting If you subscribe to a call waiting service with your local telephone service provider, you will hear a beep if someone calls while you are already on a call. Press PHONE/FLASH on the cordless handset or FLASH on the base to put your current call on hold and take the new call.
Telephone operation Options while on calls Channel (cordless handset only) SCANNING... If a call is noisy, unclear or if words fade out, press MENU/CHAN on the cordless handset to scan for a better communication channel between the handset and the telephone base. Temporary tone dialing If you have dial pulse (rotary) service, you can switch to touch tone dialing during a call by pressing TONE . This can be useful if you need to send tone signals for access to answering systems or long-distance services.
Telephone operation Call transfer Call transfer To move an outside call from one cordless handset to the other cordless handset: • Press SELECT/TRANSFER. Your cordless handset will display CALL TRANSFERRED and the destination handset will begin ringing. • To answer the outside call, press PHONE/FLASH. NOTES: 1. Before the transferred call is answered, the person at the cordless handset that originated the transfer can press PHONE/FLASH to cancel the transfer function and resume the outside call. 2.
Telephone operation Intercom calls Intercom calls You can use the intercom feature to have conversations between the handset and the telephone base. Press the INT/DELETE button on the cordless handset or INTERCOM/CID DEL at the telephone base. To answer an intercom page on a cordless handset, press INT/DELETE. At the telephone base, lift the handset or press INTERCOM/CID DEL. Press INT/DELETE to page the telephone base. To end an intercom call on a cordless handset, press OFF/CLEAR.
Telephone operation Intercom calls Intercom calls During a telephone conversation, you can move the call to the telephone base from a cordless handset, or to a cordless handset from the telephone base. NOTES: 1. You can also press HOLD before starting to move the call. 2. Before the intercom call is answered, the person who originated the PAGE can press PHONE/ FLASH on the cordless handset, or on the base press SPEAKER or lift the corded handset to cancel the page and resume the outside call.
Telephone operation Intercom calls Intercom calls To move a call from the telephone base to the cordless handset: NOTE: Before the intercom call is answered, the person who originated the PAGE can press PHONE/FLASH on the cordless handset, or press SPEAKER or lift the corded handset on the base, to cancel the page and resume the outside call. • Press HOLD (If you are on the base Speakerphone, this step is optional since the outside call will automatically be put on HOLD).
Telephone operation Directories Directories (handset and base) PAT WILLIAMS 5551234 Each cordless handset or the telephone base has its own and separate directory. Each directory can store up to 30 entries. Each entry can contain a number up to 24 digits, and a name up to 15 letters. A convenient search feature can help you find and dial numbers quickly (page 28). The procedure for entering, editing and dialing directory entries is the same for both the cordless handset and the telephone base.
Telephone operation NOTE: The speed dial feature occupies up to nine of the thirty memory locations in the directory. For example, if there are only five speed dial entries, then up to 25 entries can be stored in the directory. If there are already 30 entries in the directory, no new directory and speed dial entries can be stored in memory until some of the existing ones are deleted. 1. MENU/CHAN DIRECTORY 2.
Telephone operation Speed dialing (cordless handset only) To create a directory entry 1. MENU/CHAN DIRECTORY • Press MENU/CHAN to begin programming. • Press SELECT/TRANSFER. • Enter a name (up to 15 characters), then press SELECT/TRANSFER (see page 26 for instructions). 2. SELECT/TRANSFER ENTER NAME To call a speed dial number SELECT/TRANSFER ENTER NUMBER (pages 26-27). PAT WILLIAMS 5551234 5.
Telephone operation New directory entries NOTE: If all memory locations are in use, an error tone will sound when you attempt to enter a number. This means the memory is full, and you will not be able to store a new number until you delete an existing one. 1. MENU/CHAN DIRECTORY 2. SELECT/TRANSFER ENTER NAME To enter a name • Press MENU/CHAN on cordless handset to enter the main menu. • Press SELECT/TRANSFER to confirm. • The screen will show ENTER NAME.
4 Telephone operation SELECT/TRANSFER ENTER NUMBER New directory entries To enter a number Use the dial pad to enter up to 24 digits. When the number is complete, press SELECT/TRANSFER. 5 Options while entering numbers: PAT WILLIAMS 5551234 • Use DIR to advance to the next space to the right, or use CID then INT/DELETE on cordless handset or INTERCOM/CID DEL on base to delete a mistake. • Press REDIAL/PAUSE to enter a four-second dialing pause. A P will be inserted.
1 Telephone operation DIR DIRECTORY 2 DIR Directory search Follow the steps on the left to browse through the directory, or search to find a specific entry. You can press OFF/CLEAR on the cordless handset (or CLEAR at the base) anytime to exit the directory. PAT WILLIAMS 5551234 To browse through the directory To display first entry DIR BETH 5554321 To scroll name by name 5 JOHN 5550123 To search alphabetically SPEED EDIT ERASE 5551234 To browse, press DIR or all entries one by one.
1 Telephone operation DIR DIRECTORY 2 DIR ADRM 5551234 3 SELECT/TRANSFER SPEED EDIT ERASE 5551234 DIR SPEED EDIT ERASE 5551234 DIR SPEED EDIT ERASE 5551234 Press SELECT/TRANSFER to choose blinking option on the handset. NOTES: 1. Screens shown above are displayed on the cordless handset. The telephone base display is slightly different, but the procedure is the same. 2. See page 27 for instructions on dialing a directory entry from the base.
Caller ID operation CHRISTINE SMITH 908-555-0100 10:08AM 02/14 Information about caller ID with call waiting This product has a caller ID function with call waiting feature which works with service from your local telephone company. Caller ID with call waiting lets you see the name and telephone number of the caller before answering the telephone, even when on another call. It may be necessary to change your telephone service to use this feature.
Caller ID operation Caller ID operation How caller ID works CHRISTINE SMITH 908-555-0100 10:08AM 02/14 If you subscribe to caller ID service provided by your local telephone company, information about each caller will be displayed between the first and second ring.
Caller ID operation Caller ID operation There are also occasions when other information or no information is displayed for various reasons: On-screen message Reason PRIVATE NAME CHRISTINE SMITH 908-555-0100 Caller prefers to remain anonymous. PRIVATE CALLER Caller name and telephone number not revealed at caller's request. 10:08AM UNKNOWN NAME Your local telephone company is unable to determine the caller's name.
Caller ID operation Caller ID memory NOTES: 1. The call logs on cordless handset and telephone base are not shared. Action taken on one will not affect the other. 2. Only the cordless handset will show the order of the call in call history. Memory capacity Each cordless handset or the telephone base has its own directory. Each directory can store up to 30 caller ID records respectively.
Caller ID operation Caller ID memory Dialing from the call log • Press CID on the telephone base or on the cordless handset to activate the call log. • Press CID or DIR on the telephone base or on the cordless handset to scroll to the desired number to be dialed. • Press DISP DIAL below the screen on the telephone base or press PHONE/FLASH on the cordless handset to contact the person whose name is displayed on the screen.
Caller ID operation Caller ID memory • Press SELECT/TRANSFER on cordless handset or SELECT on telephone base to edit the telephone number. You can make any changes to the number by using the CID then INTERCOM/CID DEL on telephone base and INT/DELETE on cordless handset to erase characters, or using the dial pad to enter new ones (see pages 26-27 for instructions). • Press SELECT/ TRANSFER on cordless handset or SELECT on telephone base. You can now choose to assign a distinctive ring to this entry.
Caller ID operation Caller ID memory Deleting all caller ID records • Press and hold INT/DELETE on the cordless handset or INTERCOM/CID DEL on the telephone base for two seconds or longer to clear all entries in the call log. • A message appears on the screen asking you to confirm that you want to delete all entries in the call log.
Caller ID operation Call waiting If you have subscribed to the call waiting service from your local telephone company, you will hear a beep if there is an incoming call while you are already on the phone. The telephone number of the new incoming call will also be displayed on the screen. • Press PHONE/FLASH on the cordless handset or FLASH on the telephone base to put your current call on hold and take the new call.
Answering system operation 16 Message counter Number of messages waiting (or during playback, message number currently playing) Message capacity The answering system can record up to 95 messages, depending on the length of each message. Individual messages can be up to four minutes long, and total maximum recording time is 15 minutes. Messages will remain available for replay until you delete them. Press to start or stop message playback (page 42).
Answering system operation Day & time announcements 16 To set day & time Before playing each message, the answering system announces the day & time the message was received. 1. Press CLOCK The system will announce the current clock setting, then announces "To set the clock, press CLOCK." Before using the answering system, follow the steps on left to set the day & time, so messages are dated correctly.
Answering system operation 16 Outgoing announcements Outgoing announcements are the messages callers hear when calls are answered by the answering system. Press to stop recording. Elapsed recording time (seconds). 1. ANNC. “Announcement. Press PLAY or press RECORD.” 2. PLAY/STOP (Plays announcement previously recorded). The telephone is pre-programmed with an announcement. If the telephone is set up to record messages, it answers calls with “Hello. Please leave a message after the tone.
Answering system operation Changing feature options 16 1. Menu features can be changed to program how the answering system operates. Press SETUP repeatedly to hear each feature. When you hear the feature you want to modify press SKIP or REPEAT then SETUP to change the setting. SETUP Press until desired feature is heard (see list at right). 2. SKIP or REPEAT Press until desired selection is heard. 3. Feature options (Default settings underlined).
Answering system operation Number of messages waiting (or during playback, message number currently playing). Message playback Press PLAY/STOP to hear messages. The system announces the number of messages, then begins playback. 16 PLAY/STOP Press to begin or end message playback. 1. PLAY/STOP “You have [xx] new messages and [xx] old messages” Message playback begins. See options at right. 2. PLAY/STOP Message playback ends. NOTE: If F is flashing in the message window, memory is full.
Answering system operation 16 Recording & playing memos Elapsed recording time (seconds). 1. Press to stop recording. RECORD “Record after the tone. Press STOP w h e n y o u a re done.” 2. Speak into microphone. Memos are messages you record yourself. They are saved, played back and deleted exactly like incoming messages. You can record a memo as a reminder to yourself, or leave a message for someone else if other members of your household are using the answering system.
Answering system operation 16 Message counter Message counter displays The message counter usually displays the total number of memos and incoming messages. See the list below for explanations of other displays in this counter. Message counter displays 0 No messages. 1-95 Number of messages/memos, or message number currently playing (flashes when there are new messages). 10-99 Current remote access code while setting (page 41).
Answering system operation Remote access 1. Dial your telephone number from any touch-tone telephone. 2. When the system answers, enter two digit remote access code (19 unless you have changed it). 3. 4. Enter remote commands (see list at right). Hang up to end the call and save all undeleted messages. A two digit security code is required to access your answering system from any touch-tone telephone. This code is 19 by default, see Changing feature options (page 41) to change it.
Appendix Display screen messages, lights & tones Screen display messages CONNECTING . . . CONNECTING... The handset is waiting for a dial tone. ** RINGING ** There is a call coming in. ** PAGING ** An intercom call has been initiated. (all cordless handsets beep to help you locate them). NEEDS RECHARGING Handset battery is depleted. Place handset in charger to charge the battery. BATTERY LOW Handset battery is low. Place handset in charger to charge the battery. PHONE ON The handset is in use.
Appendix Display screen messages, lights & tones Screen display messages CONNECTING . . . OTHER HANDSET ON Another cordless handset is on a call. and then Or cordless handset cannot communicate with base. Check base OR OUT OF RANGE power, or move closer. XX MISSED CALLS There are missed and unreviewed calls in your call log. CALL TRANSFERRED You are transferring an external call on your cordless handset to another cordless (destination) handset.
Appendix Display screen messages, lights & tones Alert tones “Beep-Beep...Beep-Beep...” (Double beep every five seconds) Handset battery is low. Place handset in charger to charge the battery. “Beep-Beep-Beep-BeepBeep” (Five quick beeps) Error tone (current operation has been unsuccessful; try again). “Beeeeeeeeep” (One long beep) Confirmation tone (current operation has been successfully completed). “Beep” (One beep every 10 seconds) Message alert at the telephone base (there are new messages).
Appendix Troubleshooting If you have difficulty with your phone, please try the suggestions below. For Customer Service, visit our website at www.telephones.att.com, or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268. My telephone does not work at all • Make sure the power cord is securely plugged in. • Make sure the battery is installed and charged correctly (page 7). • Make sure the telephone line cord is securely plugged firmly into the telephone base and the telephone wall jack.
Appendix Troubleshooting • If the other telephones in your home are having the same problem, the problem is in your wiring or local service. Contact your local telephone company (charges may apply). • Eliminate any background noise. Noise from a television, radio or other appliance may cause the telephone to not dial out properly. If you cannot eliminate the background noise, first try muting the cordless handset before dialing, or dialing from another room in your home with less background noise.
Appendix Troubleshooting away from these types of electronic devices as possible: wireless routers, radios, radio towers, pager towers, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones. The batteries will not hold a charge • Charge the battery in the cordless handset for at least 16 hours. For optimum daily performance, return the cordless handset to its charger when not in use.
Appendix Troubleshooting same problem, the problem is in your wiring or local service. Contact your local telephone company (charges may apply). • If you subscribe to DSL service and if you hear noise during conversations and/or your caller ID features are not functioning properly, install a DSL filter to the telephone line between the base telephone and the telephone line jack. Contact your DSL provider to obtain a DSL filter.
Appendix Troubleshooting My calls fade out or cut in and out when I am using the cordless handset • Other electronic products can cause interference with your cordless telephone. Try installing your telephone as far away as possible from electronic devices wireless routers, radios, radio towers, pager towers, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless telephones. • Your line cord might be malfunctioning.
Appendix Troubleshooting T h e CHARGE light is off • Clean the cordless handset and charging contacts on the charger each month using a pencil eraser or cloth. • Make sure the power and line cords are plugged in correctly and securely. • Unplug the telephone’s electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset. • Your telephone might be malfunctioning.
Appendix Troubleshooting System does not answer after correct number of rings • Make sure that the answering system is on (page 38). • If toll saver is activated, the number of rings changes to two when there are new messages waiting (page 41). • In some cases, the system may be affected by the ringing system used by the local telephone company. • If the memory is full or the system is off, the system will answer after 10 rings.
Appendix Important safety instructions This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information • Read and understand all instructions in the user’s manual. Observe all markings on the product. • Avoid using a telephone during a thunderstorm. There may be a slight chance of electric shock from lightning.
Appendix Important safety instructions Especially About Cordless Telephones • Privacy: The same features that make a cordless phone convenient create some limitations. Telephone calls are transmitted between the telephone base and handset by radio waves, so there is a possibility that your cordless phone conversations could be intercepted by radio receiving equipment within range of the cordless handset.
Appendix Important safety instructions • Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury. The RBRC™ Seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle nickel-metal rechargeable batteries when taken out of service within the United States.
Appendix FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US: AAAEQ##TXXXX. This identifier must be provided to your local telephone company upon request.
Appendix FCC Part 68 and ACTA If this product is equipped with a corded or cordless handset, it is hearing aid compatible. If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please: • Remain on the line and briefly explain the reason for the call before hanging up. • Perform such activities in off-peak hours, such as early morning or late evening.
Appendix FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Appendix Limited warranty The AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to: In the United States of America call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268. 1.
Appendix Limited warranty 4.
Appendix Limited warranty 6. What must you return with the PRODUCT to get warranty service? You must: a. Return the entire original package and contents including the PRODUCT to the service location along with a description of the malfunction or difficulty; and b. Include “valid proof of purchase” (sales receipt) identifying the PRODUCT purchased (PRODUCT model) and the date of purchase or receipt; and c. Provide your name, complete and correct mailing address, and telephone number. 7.
Appendix Technical specifications RF Frequency Band (Handset to Base) 5863.8MHz — 5872.5MHz RF Frequency Band (Base to Handset) 912.75MHz — 917.10MHz Channels 30 Modulation FM Operating Temperature 32°F — 122°F 0°C – 50°C Telephone Base Voltage 104 — 129 Vrms (AC Voltage, 60Hz) Telephone Base Voltage DC9V @500mA (DC Adapter Output) Handset Voltage DC3.1 — 4.3V @400mAh Charger Voltage (AC Adapter Output) DC9V @150mA Replacement Battery 3.
Appendix Index A Alert tones, 48 Answering calls, 15-16 Answering system, 38 announcements, 40 memos, 43 message playback, 42 remote access, 45 I Intercom calls, 20-22 Indicator lights, 47 L Last number redial, 15-16 M Making calls, 15-16 Memos, 43 Message playback, 42 Message counter displays, 44 Mute, 17 B Battery charging, 7 Battery installation, 7 Battery low, 7 Belt clip, 9 N Names, enter a name, 26 search for, 28 C Call waiting, 17, 37 Call transfer, 18 Caller ID, 30 Caller ID memory, 33 delete n
Appendix Remote access wallet card Use the wallet card below to help you remember commands to control your answering system from any touch tone telephone. Cut along dotted line Call your phone number, then enter your two-digit access code (preset to 19). Action Remote command Play all messages .................. 1 Play new messages ............... 2 Delete the message ..............3 Delete all old messages .....33 Repeat a message ................. 4 Stop ..............................................
www.telephones.att.com Copyright © 2007 Advanced American Telephones. All rights reserved. AT&T and the Globe symbol are trademarks of AT&T Knowledge Ventures, licensed to Advanced American Telephones. Printed in China. Issue 1 AT&T 02/07.
