User manual cordless telephone with caller ID/call waiting E5804

33
ɇ
There is no dial
tone
ƨ ƐƓ
ƨ Ɠ
might be out of range.
ƨ Ɠ-
ing a new telephone line cord.
ƨ 
connect a different telephone. If there is no dial tone on the
telephone either, the problem is in your wiring or local serv-
ƓƓ
The telephone
does not ring
when there is an
incoming call
ƨ ƪǍǎƕǍǏƫƓ
ƨ        
ƪǒƫƓ
ƨ          
base. Move it closer to the telephone base.
ƨ 
line to allow all of them to ring simultaneously. Try unplugging
some of them.
ƨ 
problem, the problem is in the wiring or local service.
ƪƫƓ
Troubleshooting
The CHARGE
light is off
ƨ        
handset and telephone base each month using a pencil
eraser or a dry non-abrasive fabric.
ƨ        
are plugged in correctly and securely.
ƨ    Ɠ   ǍǑ  
plugging it back in. Allow up to one minute for the cord-
less handset and telephone base to reset.
ƨ   Ɠ 
the Limited warranty section of this user’s manual for
further instruction.
ƨ        Ɠ
refer to the Batteries section of this user’s manual.
ƨ    Ɠ  
the Limited warranty section of this user’s manual for
further instruction.