User’s manual E5804 5.
Congratulations on purchasing your new AT&T product. Before using this AT&T product, please read the Important safety instructions on pages 38-40 of this manual. Please thoroughly read the user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada dial 1(866) 288-4268. Model #: E5804 Product name: 5.
You must install and charge the battery before using the telephone. STOP! See page 7 for easy instructions. For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268.
User’s manual E5804 5.8 GHz cordless telephone with caller ID/call waiting Table of contents Getting started Caller ID summary Quick reference guide.........................2 ..............................24 Parts checklist .........................................4 To review the call summary .........27 Telephone base installation.............5 ........28 Battery installation & charging ......7 Add entries to the directory.........
Getting started Quick reference guide Cordless handset CID/-VOLUME DIR While in a menu, press to scoll down. When in idle mode, press to display call summary entries (page 27). While entering names or numbers, press to move the Ɠ Ɛ press CID to decrease listening volume. /VOLUME+ While in a menu, press to scoll up. When in idle mode, press to display directory entries (page 22).
Getting started Quick reference guide Telephone base VOICEMAIL Flashes when there is new voicemail (requires voicemail service from your local telephone company). CHARGE/IN USE HANDSET LOCATOR ƨ to charge in the telephone base. ƨ Press to make the handset beep when the handset is not on the telephone ƪ ǍǒƫƓ Flashes quickly while an incoming call is ringing.
Getting started Parts checklist Save your sales receipt and original packaging in case you need to ship your telephone for warranty service. Ɠ number of your telephone can be found on the label located on the bottom of the telephone base. User’s manual Quick start guide E5804 5.8 GHz cordless Telephone with caller ID/call waiting E5804 5.
Getting started Telephone base installation connected to a wall switch. The telephone base can be placed on a flat surface or mounted on a standard wall plate. For optimum range and better reception, place the telephone base in a high and open location.
Getting started Telephone base installation 1. Plug the small end of the larger power adapter into the power jack at the bottom of the telephone base. 2. Plug one end of the telephone line cord into the telephone jack at the bottom of the telephone base. 3. slots. 5. Plug the other end of the telephone line cord into a telephone jack. 4. Plug the large end of the larger power adapter into an electrical outlet not controlled by a wall switch.
Getting started Battery installation & charging After installing the battery, you may be able to make or receive short calls. For Ɛ Ǎǒ hours before use. You can keep the battery charged by returning the handset to the telephone base after use. When the battery is fully depleted, a recharge takes about 12 hours.
Getting started Installation options NOTE: The mounting bracket must be used for both tabletop use and wall mounting positions. Tabletop mount Wall mount Telephone outlet mounting plate with mounting studs Wall mounting The telephone base comes with the bracket mounted for tabletop use. If wall mounting is desired, a telephone outlet wall mounting plate with mounting studs is required.
Getting started Installation options 3. To attach the bracket for wall mounting, insert and on the tabs of the bracket into slots the telephone base, then press the other bracket and as shown on the right. tabs into slots 4. Plug the power adapter into an electrical outlet not controlled by a wall switch. Plug the telephone line cord into a telephone wall jack. To mount the telephone on the wall, position the mounting holes and over the telephone outlet mounting studs.
Getting started Belt clip & optional headset Install belt clip as shown below if desired. Snap belt clip into notches on both sides of handset. To release belt clip from handset, lift one side of the belt clip out of the notch. For hands-free telephone conversations, use any industry standard 2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset. To order an AT&T 2.5 mm headset, visit our website at www.telephones.att.com or call 1 (800) 222-3111.
Telephone operation Settings Use the MENU/SELECT to change the handset settings. Follow the steps below to program the cordless handset. To stop at any time, press OFF/CLEAR. Language ,!.'5!'% The default language for the handset screen displays is English. To change the language to Espanol, or Francais: 1. Press MENU/SELECT. 2. Press CID or LANGUAGE. DIR until the screen displays 3. Use MENU/SELECT to change the current setting. 4. Press CID or DIR Ɛ ɇ ɇ Ɛ ɇ Ɠ 5.
Telephone operation Settings Selectable ringer melodies 1. Press MENU/SELECT to begin programming. 2).'%2 2. Press CID or DIR until the screen displays RINGER: and the current setting. 3. Use MENU/SELECT to change the current setting. 4. Press CID or DIR to display 1, 2, 3, 4 or OFF. You will hear a sample of each ringer sound. 5. Press MENU/SELECT to choose displayed ringer Ɠ $!4% 4)-% NOTES: 1.
Telephone operation Settings Choose ringer volume setting 2).'%2 6/, ,/7 when the cordless 1. Press and hold CID or DIR handset is idle (not in use). This feature allows you to choose low, med, high ringer volume or turn the ringer off. 2. Press CID or DIR to choose the desired option. You will hear a sample of each ringer volume. 3. Press MENU/SELECT to choose blinking ringer Ɠ .
Telephone operation Basic operation Making and answering calls Elapsed 0(/.% /. time Ɛ ƪ CID, DIR and OFF/CLEAR). To make a call, press PHONE/FLASH or SPEAKER, then dial a number. Press OFF/CLEAR to hang up. To predial (preview numbers before dialing), enter numbers first, then press PHONE/FLASH or SPEAKER to dial. Press CID then CHAN/DELETE anytime to make corrections when entering numbers.
Telephone operation Basic operation Last number redial While the phone is not in use, press REDIAL/PAUSE on the cordless handset to display the last number called (up to 32 digits). To dial the number displayed, press PHONE/FLASH or SPEAKER. Ɛ after pressing PHONE/FLASH or SPEAKER, press REDIAL/PAUSE to call the last number dialed. silenced To delete this number, press REDIAL/PAUSE twice when the phone is not in use. This will clear the redial memory and leave it blank.
Telephone operation Basic operation Handset locator 0!').' HANDSET If you misplace the handset, press LOCATOR on the telephone base. This starts the ǒnj help you locate it. To stop the paging tone, press OFF/CLEAR on handset, or place handset in the telephone base, or press the HANDSET LOCATOR on the telephone base. NOTE: If the handset is charging in the telephone HANDSET LOCATOR does not generate a base, pressing paging tone.
Telephone operation Options while on calls Volume control Press CID/-VOLUME to decrease the volume. Press DIR /VOLUME+ to increase the volume. When changing the volume level, the new setting is saved. 6/,5-% Call waiting If you subscribe to call waiting service with your local telephone company, there will be a beep if there is an incoming call while you are already on a call. Press PHONE/FLASH to put your current call on hold and take the new call.
Directory Memory capacity 0!4 7),,)!-3 The handset directory can store up to 30 entries (including nine speed dial locations). Each entry can contain a number up to 24 digits, and a name up to 15 letters long. A convenient search feature can help you find and dial numbers quickly (page 22). Timeouts and error messages If you pause for too long while creating an entry, the procedure will time out and you will have to begin again.
NOTE: The speed dial feature occupies up to nine of the thirty memory locations in the Ɠ Ɛ are only five speed dial entries, then up to 25 entries can be stored in the directory. If there are already 30 entries in the directory, no new directory and speed dial entries can be stored in memory until some of the Ɠ Speed dial You can enter nine speed dial numbers of up to 24 digits.
New directory entries NOTE: If all memory locations are in use, an error tone will sound when you attempt to enter a number. This means the memory is full, and you will not be able to store a new number until you Ɠ 1. MENU/SELECT $)2%#4/29 To enter a name ƨ MENU/SELECT twice. ƨ ENTER NAME. ƨ ƪ ǍǑ ters) of the person using the table below.
New directory entries 4. MENU/SELECT %.4%2 .5-"%2 To enter a number Use the dial pad to enter up to 24 digits. When the number is complete, press MENU/SELECT. Options while entering numbers: ƨ CID then CHAN/DELETE to erase digits if you make a mistake. 5. 024 */(.3/. ? ǒƓ MENU/SELECT $)34).#4 2).' . 7. MENU/SELECT ƨ REDIAL/PAUSE to enter a four-second dialing pause. A 0 will be inserted.
1. DIR $)2%#4/29 2. DIR !$! To display first entry DIR "%4( To scroll name by name -OR- 5 */(. To search alphabetically Directory search Follow the steps on the left to browse through the directory or search to find a specific entry. You can press OFF/CLEAR Ɠ To browse through the directory To browse, press DIR then press CID or to scroll through all entries one by one.
To change or dial entries When any entry is displayed, press MENU/SELECT to see options. Press CID or DIR to highlight ƪ ƫƐ MENU/SELECT again to select it. 1. DIR $)2%#4/29 2. When EDIT is blinking, press MENU/SELECT. You can change the name and number (or distinctive ring setting on the cordless handset) by following the steps described on pages 19-21. DIR !$2 3.
Caller ID summary Information about caller ID with call waiting #(2)34).% 3-)4( AM ing feature which works with service from your local telephone company. and telephone number of the caller before answering the telephone, even when on another call.
Caller ID summary How caller ID works your local telephone company, information about each caller will be displayed between the first and second ring. #(2)34).% 3-)4( AM Appears when a caller has made two or more consecutive calls. ƛ ƛ number #(2)34).% 3-)4( AM call summary Appears when the call is missed and un-reviewed.
Caller ID summary There are also occasions when other information or no information is displayed for various reasons: #(2)34).% 3-)4( AM Reason 02)6!4% .!-% mous. 02)6!4% #!,,%2 number not revealed at caller's request. 5.+./7. .!-% Your local telephone company is unable to determine the caller's name. 5.+./7.
1. CID 0!4 */(.3/. AM 2. CID #(2)3 7),,)!-3 AM 3. To dial this number NOTE: ing calls originating from the same telephone number are identified by an asterisk at the top right corner of the screen and will be counted as one call in the caller Ɠ CID 0!4 */(.3/. AM - ORCID 0!4 */(.3/. AM 2. # 0!4 */(.3/. AM 3.
1. CID 0!4 */(.3/. AM 2. CID #(2)3 7),,)!-3 AM 3. CHAN/DELETE -!2+ #,!94/. AM - OR -)33%$ #!,,3 AM 1. To delete a single call summary entry Press CID Ɠ Press CID or DIR to find the entry you want to delete, then press CHAN/DELETE.
1. CID 0!4 */(.3/. AM 2. MENU/SELECT then CID or DIR $)!, 02/'2! AM 3. MENU/SELECT 0!4 */(.3/. AM Add entries to the directory Ɛ steps at left to enter it into your phone directory. Both the caller’s name and telephone number will be entered as they appear in the call summary.
ɇ Screen icons, indicator lights & tones Screen icons & alert tones Screen icons -)33%$ #!,,3 AM The handset speakerphone is in use. Microphone is muted. Ɠ Battery charging (animated display). ƪ ƫƑ recharge. Missed and un-reviewed calls.
ɇ Handset display screen messages Screen display messages #/..%#4).' #/..%#4).' The cordless handset is waiting for a dial tone. 2).').' There is a call coming in. 0!').' The cordless handset locator has been activated (the cordless handset beep to help you locate it). .%%$3 2%#(!2').' Ɠ Place cordless handset in base to charge the battery.
ɇ Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For Customer Service, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268. My telephone does not work at all ƨ (page 7). For optimum daily performance, return the cordless handset to the telephone base after use.
ɇ Troubleshooting ƨ Ɠ refer to the Batteries section of this user’s manual. ƨ Ɠ the Limited warranty section of this user’s manual for further instruction. The CHARGE light is off ƨ handset and telephone base each month using a pencil eraser or a dry non-abrasive fabric.
ɇ Troubleshooting ƨ cordless telephone. Try installing your telephone as far away as possible from the following electronic devices: wireless routers, radios, radio towers, pager towers, cellular telephones, digital telephones, intercoms, room Ɛ Ɛ Ɛ Ɛ appliances, and other cordless telephones.
ɇ Troubleshooting ƨ Ɠ sion, radio, or other appliances may cause the telephone to not dial out properly. If you cannot eliminate the background noise, first try muting the cordless handset before dialing, or dialing from another room in your home with less background noise. There is noise or interference during a telephone conversation ƨ Ɠ telephone base.
ɇ Troubleshooting ƨ Ǎnj ƪ the user’s manual of your router for more information). ƨ same problem, the problem is in the wiring or local servƓ ƪ apply).
ɇ Troubleshooting for electronic equipment ƨ If the telephone is not responding normally, try putting the cordless handset in the telephone base or the charger. If it does not seem to respond, try the following (in the order listed): ǍƓ Ɠ ǎƓ Ɠ 3. Wait a few minutes before connecting power to the telephone base. ǐƓ ƕ into the telephone base.
ɇ Important safety instructions This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information ƨ Read and understand all instructions in the user’s manual. Observe all markings on the product. ƨ Avoid using a telephone during a thunderstorm. There may be a slight chance of electric shock from lightning.
ɇ Important safety instructions Especially About Cordless Telephones ƨ Privacy: The same features that make a cordless phone convenient create some limitations. Telephone calls are transmitted between the telephone base and handset by radio waves, so there is a possibility that your cordless phone conversations could be intercepted by radio receiving equipment within range of the cordless handset.
ɇ Important safety instructions ƨ Nickel-metal hydride rechargeable batteries: Ɠ Ɠ Ɛ if burned or punctured, they could release caustic material which could cause injury. Ɇ ™ Seal means that the manufacturer is voluntarily participating in an industry program to collect and recycle nickel-metal rechargeable batteries when taken out of service within the United States.
ɇ FCC Part 68 & ACTA ǒǔ ɇ ɇ ƪɇ ɇƫƓ Ɛ other things, a product identifier in the format US: AAAEQ##TXXXX. This identifier must be provided to your local telephone company upon request.
ɇ FCC Part 68 and ACTA If this product is equipped with a corded or cordless handset, it is hearing aid compatible. If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please: ƨ ing up. ƨ ƕ Ɛ evening.
ɇ FCC Part 15 This equipment has been tested and found to comply with the requirements Ɇ ǍǑ ƪ ƫ Ɠ These requirements are intended to provide reasonable protection against harmful interference in a residential installation.
ɇ Limited warranty The AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to: In the United States of America visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada dial 1 (866) 288-4268.
ɇ Limited warranty ǐƓ Ƙ This limited warranty does not cover: ƨ Ɛ Ɛ physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water, or other liquid intrusion; or ƨ Ɛ Ɛ tion by anyone other than an authorized service representative of the manufacturer; or ƨ
ɇ Limited warranty ǒƓ Ƙ You must: Ɠ to the service location along with a description of the malfunction or difficulty; and Ɠ Ɯ Ɲ ƪ ƫ ƪ ƫ Ƒ c. Provide your name, complete and correct mailing address, and telephone number.
ɇ Technical specifications RF frequency band (handset to telephone base) ǑǔǑǓƓǎ Ƨ ǑǔǒǑƓǕ RF frequency band (telephone base to handset) 912.75 MHė — 917.10 MHz Channels 30 Modulation FM Operating temperature 32°F — 122°F njȻ Ƨ ǑnjȻ Telephone base voltage (AC voltage, 60Hz) 104 — 129Vrms Telephone base voltage (AC adapter output) ɇ 9V @250mA Handset voltage 3.1 — 4.
ɇ Index A Alert tones, 30 Answering calls, 14 I Incoming call summary, 25 Incoming calls, answering, 14 Indicator lights, 30 B Battery charging, 7 Battery installation, 7 Battery low, 7 Belt clip, 10 L Ɛ ǍǑ M Making calls, 14 Menus, 2 Ɛ ǎǒ Mute, 17 C Ɛ ǍǓ Ɛ ǎǐ add entries to phone directory, 29 delete entries, 28 dial entries, 27 Ɛ ǍǓ N Names, enter into directory, 20 search for, 22 D Ɛ ǎǔ
www.telephones.att.com © 2007 Advanced American Telephones. All rights reserved.
