User manual

Replacing a Handset

If you are replacing a handset on a system that has the maximum

number of handsets registered (4), or wish to change the

assigned handset number of your registered handsets, you must

first de-register the handsets, then re-register all handsets.

De-Register All Handsets

• Unplug the power supply from the base unit.

(E5634B/E5633/E5630/E5603B/E5600)

• Remove all handsets from the charge cradles and base.

• Plug in the power supply while pressing and holding the

HANDSET LOCATOR button.

• Continue pressing HANDSET LOCATOR until the IN USE,

CHARGING (E5634B/E5633/E5630/E5603B/E5600) and

MESSAGE WAITING (E5603B and E5600 only) indicators are

lit. (this could take up to 10 seconds).

• Release the HANDSET LOCATOR button.

• All Handsets will display:

Once the base indicators turn off (up to 30 seconds), the

handsets have been de-registered from the base, and can now be

re-registered (see page 5).

ENTER BASE ID

91-000341-030-000-E560-1 Manual July.11,05.qxd 2/13/1950 7:21 PM Page 6