96-005819-020-000.E1225B.R0.qxd 13-02-1950 19.21 Page 1 Quick Start Guide 2.
96-005819-020-000.E1225B.R0.qxd 13-02-1950 19.21 Page 2 Installation and setup Connect the base and install battery as shown below. After installation, place the handset in the base to charge for 12 hours before use. You can keep the battery charged by returning the handset to the base or charger after each use. Plug power cord transformer into electrical outlet. Press tab to open battery compartment. Plug telephone line cord into telephone jack. Replace compartment cover.
96-005819-020-000.E1225B.R0.qxd 13-02-1950 19.21 Page 3 Quick reference guide Handset Select/Menu V CID Press to display menu, or to select highlighted item from menu. Press to scroll down in menus. Press when phone is not in use to display Caller ID information. While entering names, press to move the cursor to the left. ^ DIR Press to scroll up in menus. Press when phone is not in use to display phone book entries. While entering names, press to advance cursor.
96-005819-020-000.E1225B.R0.qxd 13-02-1950 19.21 Page 4 Quick reference guide Telephone Base Volume Handset Locator Press to adjust message playback volume. Press to locate handset if lost. Charging On when handset battery is charging. In Use On when handset is in use. Flashes when another phone is in use on the same line, or answering system is answering an incoming call. Answering System Controls Press to repeat message. Hold to slow playback. Press twice to hear previous message.
