User Guide
Table Of Contents
- E2525 manual
- Table of contents
- Quick reference guide
- Parts checklist
- Before you begin
- Telephone base installation
- Battery installation & charging
- Wall mounting
- Connect cords as shown, then press and slide down firmly so base is held securely on outlet mounting pegs
- Clip wall-mount bracket securely into notches on underside of base
- Plug short telephone line cord into telephone jack
- Plug power cord transformer into electrical outlet
- Place handset in base to charge for 8 hours before first use.
- Belt clip & optional headset
- Telephone Operation
- Phonebook
- Caller ID Logs
- Answering System Operation
- Appendix
- Display screen status icons
- Alert tones and indicator lights
- Adding new handsets
- Charging spare batteries
- In case of difficulty
- Telephone does not work at all
- Phone does not ring
- If you hear noise or interference during a call
- If you lose a call while using the handset
- Incomplete messages
- Difficulty hearing messages
- System does not answer after correct number of rings
- “CL” appears in message window
- System does not respond to remote commands
- Announcement message is not clear
- Index
- Technical specifications
- Remote access wallet card
- IMAGES
- E250 manual
10
Telephone Operation
Basic handset operation
Making and answering calls
To answer a call, press PHONE or any dial pad button.
To make a call, press PHONE, then dial a number. Press
OFF to hang up.
To preview numbers before dialing, enter numbers first,
then press PHONE to dial. Press CLEAR at any time to
make corrections as you are entering numbers. Press
PAUSE to enter a 3-second dialing pause.
Hands-free speakerphone calls
To answer a call, press SPEAKER. To make a call, press
SPEAKER, then dial a number. During a call you can
press SPEAKER to toggle between hands-free speaker-
phone and normal handset use. Press OFF to hang up.
Last number redial
Press REDIAL to display the last 10 numbers called (up to
32 digits each). Use the ^V buttons to select a
number, then press PHONE to dial. Press SELECT then
ERASE to delete this number from the redial memory,
or SAVE to copy the number into your phonebook.
Hold and mute
Press HOLD to place a call on hold. Press PHONE (or
SPEAKER) to resume the call.
Press MUTE to silence the microphone. You will be able
to hear, but your caller will not be able to hear you
until you press MUTE again to resume speaking.
Call transfer
During a conversation you can transfer the call to the
base speakerphone or to another handset.
Press
XFER to display a list of sets. Use the ^V
buttons to highlight the set you want, then press OK to
transfer the call to the remote set.
The call will be placed on hold. Press
PHONE or SPEAKER
at the remote set to resume the call.
HANDSET 1
BASE
HANDSET 2
HANDSET 3
1
1
1
REDIAL MEM
MENU
XFER MUTE
HOLD
XFER MUTEHOLD
^ V
OK
ATT-2525CIB-d2.qxd 12/30/2003 6:27 PM Page 10