User`s manual

34
Caller ID operation
Caller ID memory
Dialing from the call summary
• Press CID on the telephone base or on the
cordless handset to activate the call summary.
• Press CID or DIR on the telephone base or
on the cordless handset to scroll to the desired
number to be dialed.
• Press DISP DIAL below the screen on the tele-
phone base or press PHONE/FLASH on the
cordless handset to contact the person whose
name is displayed on the screen.
NOTE: If the number displayed is not in the correct format,
press # to select the desired dialing options.
Storing a record from the call summary into the
directory
• Press CID on the telephone base or on the
cordless handset to activate the call summary.
• Press CID or DIR on the telephone base or
on the cordless handset to scroll to the caller
entry to be stored in the directory.
• When the desired entry is displayed, press
SE LECT/T RANSFER on cordless handset or
SELECT on telephone base.
• When the options DIAL and PROGRAM
appear on the screen with the word PROGRAM
flashing, press SELECT/TRANSFER on cordless
handset or SELECT on telephone base
• The cursor will flash on the first letter of the top
row. If it is necessary to edit the name before
entering it into the directory, use the CID on
both cordless handset and telephone base then
use INTERCOM/CID DEL on telephone base or
INT/DELETE on the cordless handset to delete
existing characters, or use the keypad to make
changes to the name to be used in the directory
(page 26).
NOTES:
1. When there are unanswered
calls, the screen on the tele-
phone will show the number of
missed calls.
2. When only some of the missed
calls have been reviewed, the
screen on the telephone will
continue to show the remaining
number of unreviewed calls.