User`s manual

Telephone operation

Handset settings

Set handset date & time

The handset displays the date & time when idle.

You can set the time manually, or you can allow

it to be set automatically with incoming caller ID

information. The time will be set automatically

only if you subscribe to caller ID service provided

by your local telephone company (page 30).

• Press MENU/CHAN to begin programming.

• Press CID/-VOLUME or DIR /VOLUME+ until

th e s creen displays DATE/T IME. Pres s

SELECT/TRANSFER to confirm.

• The month in the displayed date starts to flash.

Use CID/-VOLUME or DIR /VOLUME+ to

scroll through the numbers 1 (for January), 12

(for December). Press SELECT/TRANSFER when

the appropriate month is flashing.

• The date starts to flash. Use CID/-VOLUME

or DIR /VOLUME+ to scroll through the num-

bers 01-31. Press SELECT/TRANSFER when the

appropriate date is flashing.

• The hour starts to flash. Use CID/-VOLUME or

DIR /VOLUME+ to scroll through the numbers

1-12. Press SELECT/TRANSFER when the appro-

priate hour is flashing.

• The minute starts to flash. Use CID/-VOLUME

or DIR /VOLUME+ to scroll through the num-

bers 00-59. Press SELECT/TRANSFER when the

appropriate minute is flashing.

• AM/PM starts to flash. Use CID/-VOLUME or

DIR /VOLUME+ to alternate between AM and

PM. Press SELECT/TRANSFER when the appro-

priate option is flashing, save the selection and

exit.

DATE/TIME

10:08

02/14

NOTES:

1. You can choose to set the time manually, or you can allow

it to be set automatically with incoming caller ID informa-

tion. The time will be set automatically only if you sub-

scribe to caller ID service provided by your local telephone

company.

2. Caller ID will not set the year. See page 39 for instructions

on how to set the year.