User’s manual 2.
Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety instructions on pages 54-56 of this manual. Please thoroughly read the user’s manual for all the feature operation and troubleshooting information you need to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com Model #: E2913B/E1113B Product name: 2.
You must install and charge the battery before using the telephone. STOP! See page 7 for easy instructions. For customer service or product information, visit our website at www.telephones.att.com. CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully: • Use only the supplied rechargeable battery or replacement battery (model 27910, part number 89-009900-00) or equivalent.
User's manual 2.4 GHz Cordless Telephone/Answering System E2913B/E1113B FLASH CLEAR TONE MUTE REDIAL DELETE PAUSE INT with caller ID/ call waiting Table of contents Getting started Answering system operation Quick reference guide.......................2 Parts checklist.......................................4 Telephone base installation............5 Battery installation & charging.............7 Installation options.............................8 Belt clip & headset................................
Getting started Quick reference guide Cordless handset MENU������� /������ SELECT CID/-VOLUME Press to display the menu. Once in the menu, press to select an item or save an entry or setting. Press to scroll down while in menus. Press to display caller ID information (page 33). While entering names or numbers, press to move the cursor to the left (page 26). Press to decrease the listening volume while on a call (page ���������� 14)�. DIR Press to scroll up while in menus.
Getting started Quick reference guide Telephone base CHARGE/IN USE Flashes when another telephone on the same line or one of the handsets is in use. Flashes when the answering system is answering an incoming call. HANDSET LOCATOR Flashes while an incoming call is ringing. Press to make handsets beep (page 13). On steady when the handset is properly positioned to charge in the telephone base. SETUP ANNC Press to review or change answering system options (page 37).
Getting started Parts checklist Save your sales receipt and original packaging in case it is necessary to ship your telephone for warranty service. Check to make sure the telephone package includes the following: User’s manual Quick start guide 2.4 GHz Cordless Telephone/Answering System E2913B/ E1113B 2.
Getting started Telephone base installation Choose a central location close to a telephone jack and a power outlet not connected to a wall switch. The telephone base can be placed on a flat surface or mounted on a standard wall plate. For optimum range and better reception, place the telephone base in a high and open location.
Getting started Telephone base installation 2. Plug the small end of the power adapt- 1. Plug one end of the telephone line cord er into the power jack at the bottom of the telephone base. into the telephone jack at the bottom of the telephone base. 3. Route cords through slots. 5. Plug the other end of the telephone line cord into a telephone jack. 4. Plug the large end DSL filter (Optional for DSL users, see number four in the note section, below.
Getting started Battery installation & charging After installing the battery, you may be able to make and receive short calls. For best performance, place the handsets in the telephone base or the charger and charge for 16 hours before use. You can keep the battery charged by returning the handsets to the telephone base or the charger after use. When the battery is fully depleted, a recharge takes about 12 hours.
Getting started Installation options Tabletop mount Wall mount Telephone outlet mounting plate with mounting studs Wall mounting The telephone base comes with the bracket mounted for tabletop use. If wall mounting is desired, a telephone outlet wall mounting plate with mounting studs is required. This mounting plate with studs may be available for purchase from many hardware or consumer electronics retailers and may require professional installation. 1.
Getting started Installation options 3. To attach the bracket for wall mounting, insert the tabs of the bracket into slots and on the telephone base, then press the other bracket tabs into slots and as shown on the right. 4. Plug the power adapter into an electrical outlet not controlled by a wall switch. Plug the telephone line cord into a telephone wall jack. To mount the telephone on the wall, position the mounting holes and over the telephone outlet mounting studs.
Getting started Belt clip & optional headset Install belt clip as shown below if desired. Snap belt clip into the notches on both sides of handset. To release belt clip from handset, lift one side of the belt clip out of the notch. For hands-free telephone conversations, use any industry standard 2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset. To order an AT&T 2.5 mm headset, visit our website at www.telephones.att.
Telephone operation Elapsed time PHONE 00:00:30 Basic operation Making and answering calls To answer an incoming call, press PHONE/FLASH, SPEAKER or any dial pad key (0-9, * or #) on the handset. To make a call, press PHONE/FLASH or SPEAKER then dial a number. Press OFF/CLEAR or place the handset in the telephone base or charger to hang up. TONE MUTE REDIAL DELETE PAUSE PREDIAL To predial (preview numbers before dialing), enter numbers first.
Telephone operation Basic operation REDIAL 555-1234 RINGER MUTE Last number redial Press REDIAL/PAUSE to display the most recently called numbers (up to 32 digits). Press CID/-VOLUME, DIR /VOLUME+ or REDIAL/PAUSE repeatedly to view up to five recently called numbers. The handset beeps twice at the beginning or end of the list. Press OFF/CLEAR to exit. Press SPEAKER or PHONE/FLASH to redial any displayed number.
Telephone operation Basic operation Handset locator If the handsets are misplaced, press HANDSET LOCATOR on the telephone base. The handsets will play a paging tone for 60 seconds to help you locate them. To stop the paging tone, press PHONE/FLASH, SPEAKER, or any dial pad key (0-9, *, or #) on the handsets, or press HANDSET LOCATOR on the telephone base. NOTES: 1. If the handset ringer is set to off (0), the hanset locator feature is not avaible on that handset (page 24). 2.
Telephone operation Options while on calls Volume control Press CID/-VOLUME to decrease the volume. Press DIR /VOLUME+ to increase the volume. When changing the volume level, the new setting is saved. NOTE: The hands-free speakerphone and headset listening volume are adjusted separately. Call waiting Volume Flash TONE MUTE REDIAL DELETE PAUSE If you subscribe to call waiting service with your local telephone company, there will be a beep if there is an incoming call while you are already on a call.
Telephone operation Options while on calls Mute Press MUTE/DELETE to silence the microphone. When mute is on, will show on the handset screen. You will be able to hear the caller, but your caller will not be able to hear you until you press MUTE/DELETE again and resume speaking. When mute is turned off, MICROPHONE ON will show temporarily on the handset screen. Mute is automatically cancelled when you end a call.
Telephone operation Intercom TONE TONE MUTE REDIAL MUTE REDIAL DELETE PAUSE DELETE PAUSE HANDSET 1 12:45PM Use the intercom feature for conversations between handsets. 1. Press INT. The screen of the originating handset will show INTERCOM TO:. 2. Enter the handset number of the destination handset (1, 2 or 3). The display will show CALLING HANDSET X. The destination handset will ring, and its screen will show HANDSET X IS CALLING.
Telephone operation Intercom call transfer Use the intercom feature to transfer an external call from one handset to another. TONE TONE MUTE REDIAL MUTE REDIAL DELETE PAUSE DELETE PAUSE PHONE 00:05:30 INTERCOM TO: INTERCOM 1. During a conversation with an external call, press INT. The external call is automatically placed on hold. The originating handset’s screen will show INTERCOM TO:. 2. Enter the handset number of the destination handset (1, 2 or 3). The display will show CALLING HANDSET X.
Telephone operation Handset settings Language This feature allows you to select the language used in all menus and screen displays. HANDSET 1 12:45PM 1. Press MENU/SELECT to enter the main menu. MENU 2. Press CID/-VOLUME or DIR /VOLUME+ to scroll to SETTINGS. Press MENU/SELECT. DIRECTORY 3. Press CID/-VOLUME or DIR /VOLUME+ to scroll to LANGUAGE. Press MENU/SELECT. 4. Press CID/-VOLUME or DIR /VOLUME+ to select ENGLISH, FRANCAIS or ESPANOL. 5. Press MENU/SELECT to save your preference.
Telephone operation Handset settings Clock setting HANDSET 1 To set the clock that is displayed on the handset screen: 1. Press MENU/SELECT to enter the main menu. 12:45PM 2. Press CID/-VOLUME or DIR /VOLUME+ to scroll to SETTINGS. Press MENU/SELECT. MENU 3. Press CID/-VOLUME or DIR to CLOCK SETTING. Press DIRECTORY /VOLUME+ to scroll MENU/SELECT. 4. Press the dial pad (0-9) to enter the hour (12 hour clock format). Press MENU/SELECT. 5. Press the dial pad (0-9) to enter the minute.
Telephone operation Handset settings Clear voice mail indication HANDSET 1 NEW VOICE MAIL If you subscribe to voicemail services provided by your local telephone company, NEW VOICE MAIL and a icon will appear on the handset display when you have a new voicemail message. 12:45PM MENU To manually remove the NEW VOICE MAIL message and the icon on the display: DIRECTORY 1. Press MENU/SELECT to enter the main menu. 2. Press CID/-VOLUME or DIR /VOLUME+ to scroll to SETTINGS. Press MENU/SELECT. 3.
Telephone operation Sounds Ringer melody HANDSET 1 This feature allows you to choose one of 10 ringer melodies. 12:45PM 1. Press MENU/SELECT to enter the main menu. MENU 2. Press CID/-VOLUME or DIR /VOLUME+ to scroll to Sounds. Press MENU/SELECT. DIRECTORY 3. Press CID/-VOLUME or DIR /VOLUME+ to scroll to RINGER MELODY. Press MENU/SELECT. 4. Press CID/-VOLUME or DIR /VOLUME+ to sample each ringer melody. / 5. Press MENU/SELECT to confirm your selection.
Telephone operation Display Wallpaper HANDSET 1 This feature allows you to select an image as wallpaper to be displayed in the background of your handset's display screen. 12:45PM 1. Press MENU/SELECT to enter the main menu. MENU 2. Press CID/-VOLUME or DIR /VOLUME+ to scroll to DISPLAY. Press MENU/SELECT. DIRECTORY 3. Press CID/-VOLUME or DIR /VOLUME+ to scroll to WALLPAPER. Press MENU/SELECT. 4. Press CID/-VOLUME or DIR /VOLUME+ to display the ten available options. / 5.
Telephone operation Display Brightness HANDSET 1 At this menu you can adjust screen brightness to one of five levels to maximize readability in different lighting conditions. 12:45PM 1. Press MENU/SELECT to enter the main menu. MENU 2. Press CID/-VOLUME or DIR /VOLUME+ to scroll to DISPLAY. Press MENU/SELECT. DIRECTORY 3. Press CID/-VOLUME or DIR /VOLUME+ to scroll to BRIGHTNESS. Press MENU/SELECT. 4. Press CID/-VOLUME or DIR /VOLUME+ to view a sample of each brightness level. / 5.
Telephone operation Ringer volume The ringer volume level can be adjusted (1-6) or turned off (0). HANDSET 1 12:45PM 1. Press MENU/SELECT to enter the main menu. MENU 2. Press CID/-VOLUME or DIR /VOLUME+ to scroll to RINGER VOLUME. Press MENU/SELECT. 3. Press CID/-VOLUME or DIR each volume level. DIRECTORY /VOLUME+ to sample 4. Press MENU/SELECT to confirm your selection. / NOTES: 1.
Directory Shared directory DIRECTORY Pat Williams 555-1234 The directory is stored in the telephone base and is shared by all handsets. Changes made to the directory on any handset will apply to all handsets. NOTE: Only one handset can review the directory or caller ID log at a time. If the other handset attempts to enter the directory, its screen will display NOT AVAILABLE AT THIS TIME. TONE MUTE REDIAL DELETE PAUSE Memory capacity The directory can store up to 50 entries.
Directory New directory entries To create a new directory entry HANDSET 1 12:45PM MENU Press MENU/SELECT, then press MENU/SELECT to choose DIRECTORY. Press CID/-VOLUME to highlight STORE. Press MENU/SELECT, then enter the telephone number when ENTER NUMBER is prompted. Press the dial pad to enter up to 32 digits. DIRECTORY SELECT DIRECTORY REVIEW STORE • Press CID/-VOLUME or DIR /VOLUME+ to move the cursor to the left or right.
Directory New directory entries DIRECTORY ENTER NAME TONE MUTE REDIAL DELETE PAUSE DIRECTORY ENTER NAME Pat Williams SELECT DIRECTORY Pat Williams 555-1234 To enter a name When ENTER NAME is prompted, use the dialpad to enter a name (up to 16 characters). When you enter names the handset will automatically make the first letter of every word uppercase and the following letters lowercase.
Directory HANDSET 1 4:30 PM DIR DIRECTORY Andrew 555-6789 DIRECTORY Barbara 555-9876 - OR - 5 DIRECTORY Jennifer 555-4321 7 DIRECTORY Pat 555-1234 Directory search To browse through the directory Press DIR /VOLUME+ to display the first listing in the directory. Press CID/-VOLUME or DIR /VOLUME+ to browse through the directory for a specific entry. Entries will be displayed alphabetically by the first letter in the name. Press OFF/CLEAR any time to exit the directory.
Directory HANDSET 1 4:30 PM DIR DIRECTORY Andrew 555-6789 SELECT DIRECTORY EDIT NUMBER 555-6789 To dial, delete or edit entries To dial a displayed number When any directory entry is displayed, press PHONE/FLASH or SPEAKER to dial the displayed number. To delete an entry When any directory entry is displayed, press MUTE/ DELETE to delete the displayed entry from the directory. Once deleted, an entry cannot be retrieved.
Caller ID operation Information about caller ID with call waiting This product has a caller ID function with call waiting feature which works with service from your local telephone company. CHRISTINE SMITH 908-555-0100 NOV23 10:01AM Caller ID with call waiting lets you see the name and telephone number of the caller before answering the telephone, even while on another call. It may be necessary to change your telephone service to use this feature.
Caller ID operation Shared caller ID log The caller ID log is stored in the telephone base, and is shared by all handsets. Changes made on any handset will apply to all. CHRISTINE SMITH 908-555-0100 NOV23 ����������� 10:01AM NOTE: Only one handset can review the directory or caller ID log at a time. If the other handset attempts to enter the call log, its screen will display NOT AVAILABLE AT THIS TIME.
Caller ID operation About names Chris 908-555-0100 NOV23 10:01AM Names of callers will be displayed only if the information is provided by your local telephone company. If the telephone number of the caller matches an exact number in the directory, the name that appears on screen will match the name already in the directory. Example: If Christine Smith calls, her name will appear as Chris if this is how it was entered in the directory.
Caller ID operation HANDSET 1 4 MISSED CALLS 4:30 PM CID CALL LOGNEW Pat Williams 555-1234 NOV 23 10:31AM CALL LOGNEW Jeffrey Adams 555-9876 NOV 23 10:21AM CALL LOGNEW Chris Thompson 908-555-0100 NOV 23 10:11AM To review the call log To review the call log Press CID/VOLUME- to review the call log. The call log displays the caller ID entries in reverse chronological order. The most recent call is displayed first. Press CID/VOLUME- or DIR /VOLUME+ to scroll through the list as shown at left.
Answering system operation Message capacity Message counter Number of messages (or during playback, message number currently playing) The answering system can record up to 95 messages depending on the length of each message. Individual messages can be up to four minutes long, and total maximum recording time is 14 minutes. Messages will remain available for replay until you delete them. Press repeatedly to hear setup options (page 37).
Answering system operation Day and time announcements To set day and time Before playing each message, the answering system announces the day and time when the message was received. 1. CLOCK The system will announce the current clock setting, then announces "To set the clock, press CLOCK." 2. CLOCK The system will announce the current day setting, then announces "To change the day, press SKIP or REPEAT, to change the hour, press CLOCK." SKIP or 3.
Answering system operation Elapsed recording time (seconds). Press to stop recording. 1. ANNC “Announcement. Press PLAY or press RECORD.” 2. PLAY/STOP (Plays announcement previously recorded). - OR - 1. ANNC “Announcement. Press PLAY or press RECORD.” 2. 3. RECORD “Record after the tone. Press STOP when you are done.” Speak into microphone. Microphone 4. PLAY/STOP (Announcement is played back). 5. ANNC to exit announcement recording.
Answering system operation Changing feature options 1. You can change how the answering system operates. Press SETUP repeatedly to hear each feature. When you hear the feature you want to modify press SKIP or REPEAT to change the setting. SETUP until desired feature is heard (see list at right). 2. SKIP or REPEAT until desired selection is heard. 3. SETUP to set selection and move to next menu option. - OR PLAY/STOP to set selection and exit menu. NOTES: 1.
Answering system operation Number of messages (or during playback, message number currently playing). Message playback Press PLAY/STOP to hear messages. The system announces the number of messages, then begins playback. If you have new messages waiting, you will hear only the new messages (oldest first). If there are no new messages, the system will play back all messages (oldest first). Press PLAY/STOP to begin or end message playback. Announcements during message playback 1.
Answering system operation Recording and playing memos Elapsed recording time (seconds). 1. Press to stop recording. To record a memo RECORD “Record after the tone. Press STOP when you are done.” 2. Memos are messages you record yourself. They are saved, played back and deleted exactly like incoming messages. You can record a memo as a reminder to yourself, or leave a message for someone else if other members of your household are using the answering system. Speak into microphone. Press RECORD.
Answering system operation Message counter displays Message counter The message counter usually displays the total number of memos and incoming messages. See the list below for explanations of other displays in this counter. Message counter displays 0 No messages. 0 (flashing) The clock needs to be set (page 35). 1-95 Total number of messages and memos, or message number currently playing. 1-95 (flashing) Total number of messages and memos.
Answering system operation Answering system mode The answering system’s default factory setting is ON in order to answer and record messages. You can turn the answering system off, but if you do so, the answering system will not answer calls or record incoming messages. 1. ANSWER ON until the system announces “Calls will not be answered.” 2. "Beep," The system has been turned off. - OR - 1. 2. ANSWER ON until the system announces “������������������������ Calls will be answered�� .
Answering system operation 1. Dial your telephone number from any touchtone telephone. 2. When system answers, enter two digit remote access code (19 unless you have changed it). 3. Enter remote commands (see list at right). Remote access A two digit security code is required to access your answering system from any touch-tone telephone. This code is 19 by default, see Changing feature options (page 37) to change it. Play all messages Play new messages 2 4.
Appendix Screen icons, indicator lights & tones Screen icons & alert tones Screen icons The handset is in use. The handset speakerphone is in use. A headset is plugged into the handset and is in use. Microphone is muted. HANDSET 1 6 MISSED CALLS There are new voicemail messages. 12:45PM Ringer off. Battery charging (animated display). Low battery (flashing); place handset in telephone base or charger to recharge.
Appendix Handset display screen messages Screen display messages XX MISSED CALLS There are new calls in the caller ID log. ALREADY SAVED The telephone number you have entered is already stored in the directory. CALL LOG EMPTY You are accessing an empty call log. CALLING HANDSET X You have placed an intercom call to another handset. CHARGING A handset with a low battery has been placed to charge in the telephone base or charger. CONNECTING ...
Appendix Handset display screen messages Screen display messages NOT AVAILABLE AT THIS TIME Someone else is already using the directory or call log which you are trying to access. NO SIGNAL, CALL ENDED During a call, the handset is no longer connected with the telephone base. Try moving it closer to the telephone base. ** PAGING ** The telephone base is paging both handsets. PHONE The handset is in use. PLACE IN CHARGER Battery power is very low.
Appendix Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For Customer Service, visit our website at www.telephones.att.com, or call 1 (800) 222-3111; in Canada, call 1 (866) 288-4268. My telephone does not work at all. • Make sure the battery is installed and charged correctly (page 7). For optimum daily performance, return the cordless handset to the telephone base after use.
Appendix Troubleshooting I cannot dial out. • First, try all the above suggestions. • Make sure there is a dial tone before dialing. It is normal if the cordless handset takes a second or two to synchronize with the telephone before producing a dial tone. Wait an extra second before dialing. • Check that all the telephones connected to the same telephone line are hung up. • Makes sure the telephone is set to the correct dial mode (pulse dial or tone dial) for the service in your area.
Appendix Troubleshooting • It may be necessary to purchase a new battery. Please refer to the Battery installation & charging section of this user's manual (page 7). • The telephone might be malfunctioning. Please refer to the Limited warranty section of this user’s manual (page 60) for further instruction. The CHARGE light is off. • Clean the metallic charging contacts on the cordless handsets each month using a pencil eraser or a dry non-abrasive fabric.
Appendix Troubleshooting • Other electronic products can cause interference to your cordless telephone. Try installing your telephone as far away as possible from the following electronic devices: wireless routers, radios, radio towers, pager towers, cellular telephones, digital telephones, intercoms, room monitors, televisions, VCRs, personal computers, kitchen appliances, and other cordless telephones.
Appendix Troubleshooting • Other electronic products can cause interference with your cordless telephone. Try installing your telephone as far away from these types of electronic devices as as possible. These devices include: routers, radios, radio towers, page towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones. There is noise or interference during a telephone conversation. • The handset may be out of range.
Appendix Troubleshooting • Disconnect the telephone base from the modular jack and plug in a corded telephone. If calls are still not clear, the problem is probably in the wiring or local service. Contact your local service company (charges may apply). • Other cordless telephones and 802.11 wireless routers that are used for home computer networks both use internal radios to communicate. The radios may interfere with one another.
Appendix Troubleshooting The system does not receive caller ID or the system does not display caller ID during call waiting. • Make sure you subscribe to caller ID with call waiting features services provided by the local telephone company. • The caller may not be calling from an area which supports caller ID. • Both you and the caller’s telephone companies must use equipment which are compatible with caller ID service.
Appendix Troubleshooting The announcement message is not clear. • When recording the announcement, make sure you speak in a normal tone of voice about nine inches from the telephone base. • Make sure there is no background noise (television, music, traffic, etc.) when recording. The answering • Make sure the answering system is on. system does not • If the memory is full the system will answer after ten rings record message. and announce “Memory is full. Enter remote access code.
Appendix Important safety instructions This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety information • Read and understand all instructions in the user’s manual. Observe all markings on the product. • Avoid using a telephone during a thunderstorm. There may be a slight chance of electric shock from lightning.
Appendix Important safety instructions Especially about cordless telephones • Privacy: The same features that make a cordless phone convenient create some limitations. Telephone calls are transmitted between the base and the handset by radio waves, so there is a possibility that your cordless phone conversations could be intercepted by radio receiving equipment within range of the cordless handset.
Appendix Important safety instructions • Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury.
Appendix FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US: AAAEQ##TXXXX. This identifier must be provided to your local telephone company upon request.
Appendix FCC Part 68 and ACTA If this product is equipped with a corded or cordless handset, it is hearing aid compatible. If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please: • Remain on the line and briefly explain the reason for the call before hanging up. • Perform such activities in off-peak hours, such as early morning or late evening.
Appendix FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Appendix Limited warranty The AT&T brand is used under license - any repair, replacement or warranty service, and all questions about this product should be directed to: In the United States of America call 1(800) 222-3111 or visit www.telephones.att. com; In Canada, call 1 (866) 288-4268. 1.
Appendix Limited warranty 4.
Appendix Limited warranty 6. What must you return with the PRODUCT to get warranty service? You must: a. Return the entire original package and contents including the PRODUCT to the service location along with a description of the malfunction or difficulty; and b. Include “valid proof of purchase” (sales receipt) identifying the PRODUCT purchased (PRODUCT model) and the date of purchase or receipt; and c. Provide your name, complete and correct mailing address, and telephone number. 7.
Appendix Technical specifications RF frequency band (handset to base) 2400 MHz — 2483.5 MHz RF frequency band (base to handset) 2400 MHz ������������ —����������� 2483.5 MHz Channels 95 Operating temperature 32°F — 122°F 0°C — 50°C Telephone base voltage (AC adapter input) AC 117V 60Hz Telephone base�������� voltage (AC adapter output) DC9V 400mA Handset voltage 3.
Appendix Index A AC Adapter, 6 Alert tones, 43 Answering calls, 11 Answering system, 34-42 Announcement, 36 F FCC and ACTA, 57 H Hands-free use, 11 Handset locator, 13 Headset, 10 B Battery charging, 7 Battery installation, 7 Belt clip, 10 Brightness, 23 I Important safety instructions, 54 Intercom, 16 Intercom call transfer, 17 Incoming call log, 30 Incoming calls answering, 11 Indicator lights, 43 C Call log, 30 Call transfer, 17 Call waiting, 14 Caller ID, 30-33 Clear voice mail indication, 20 Contr
Appendix Index O Operating range, 63 W Wall mounting, 8 Wallpaper, 22 Warranty, 60 P Part checklist, 4 Predial, 11 Q Quick reference guide, 2-3 R Receiving calls, 11 Recharging, 7 Redial, 12 Remote access, 42 Ring silencing, 12 Ring melody, 21 Ringer volume, 24 S Screen display messages, 44 Screen icons, 43 Search for names, 28 Set day and time, 35 Speakerphone, 11 T Table mounting, 9 Technical specifications, 63 Telephone base installation, 5-6 Temporary ring silencing, 12 Temporay tone dialing, 15 Trou
Appendix Remote access wallet card Use the wallet card below to help you remember commands to control your answering system from any touch tone telephone. Cut along dotted line. Call your phone number, then enter your two-digit access code (preset to 19). Action Fold here. Remote command Play all messages...................1 Play new messages................2 Delete the message...............3 Delete all old messages......33 Repeat or go back..................4 Stop...................................
www.telephones.att.com Copyright © 2006 Advanced American Telephones. All rights reserved. AT&T and the Globe symbol are trademarks of AT&T Knowledge Ventures, licensed to Advanced American Telephones. Printed in China. Issue 1 AT&T 12/06.
