Manualshelf

Technical information

ManualsBrandsAT&T ManualsNetwork RouterDEFINITY Remote Port Security Device
351352353354355356357358359360
Special Security Product and Service Offers
15-12 Issue 7 June 2001
Blocking or Reinstating Access Privileges for an
ASG Login
If a user will not need access to the system for a long period of time, you can block
the ASG Login ID’s access temporarily. Perform the following tasks to block or
reinstate access for an ASG Login.
1. At the INTUITY Main Menu, select
ASG Security Administration
and then select
ASG Security Login Administration.
The system displays the ASG Security Login Administration Window.
2. Type the user’s login ID in the
Login ID: field.
3. Set the
Access Via ASG Blocked? field to Y if you want to revoke the
user’s access to the system OR set this field to N in the
Access Via ASG
Blocked?
field if you want to reinstate the user’s access to the system.
4. Press F3 (Change) to save the changes.
The system displays a confirmation message.
5. Press ENTER, then press F6 (Cancel) twice to return to the INTUITY Main
Menu.
Changing the Encryption Key Number for an
ASG Login
The encryption key number is used by the system and by the ASG Key hand-held
device to create challenge response pairs of numbers. If an encryption key
number is lost or compromised, it must be changed in the system and in all
associated ASG Key hand-held devices. To change the encryption number.
1. At the INTUITY Main Menu, select
ASG Security Administration
and then select
ASG Security Login Administration.
The system displays the ASG Security Login Administration Window.
2. Type the user’s login ID in the
Login ID: field.
3. Set the
System Generated Secret? field to Y if you want to want the
system to generate a unique Secret Key number or set this field to N if you
want to enter your own Secret Key number.
4. If the
System Generated Secret? field is set to N, complete the
Secret Key: field.
(A Secret Key is a 20-digit string, using only the digits 0 through 7 in any
order.)
5. Press F3 (Change) to save the changes.
The system displays a confirmation message and provides the challenge
response number that the user will need to log in to the system.
6. Press ENTER, then press F6 (Cancel) twice to return to the Intuity Main
Menu.