Technical information

Securing DEFINITY Systems (Release 7.2 and Later)
with Access Security Gateway (ASG)
Issue 7 June 2001
15-7
Maintaining Login IDs
Temporarily Disabling Access Security Gateway
Access for Login
To temporarily disable Access Security Gateway, for instance, while users are on
vacation or travel:
1. At the prompt, type change login xxxx (xxx = alphanumeric login ID) and
press
Return to log into the Login Administration form.
2. On page 2 of the Login Administration form, set the
Blocked field to y.
NOTE:
Setting the Blocked field to y does not remove the login from the
system, but temporarily disables the login.
3. When completed, press Return to save your changes.
Restarting Temporarily Disabled Access Security
Gateway Access for Login
1. At the prompt, type change login xxxx (xxx = alphanumeric login ID) and
press
Return to log into the Login Administration form.
2. On page 2 of the Login Administration form, set the
Blocked field to n.
3. When completed, press Return to save your changes.
Maintaining the Access Security Gateway History
Log
The Access Security Gateway History Log logs all session establishment and
rejection events associated with users accessing the system administration and
maintenance interface through ASG. This log emulates the information provided
in the DEFINITY History Log, but also contains information on whether the
session was accepted or rejected by ASG, and if rejected, the reason for the
rejection.
This form is accessible only if the
G3 Version field on the System-Parameters
Customer-Options form is
V6 or greater and the Access Security Gateway
(ASG)
field on the form is y.