Technical information

Administering Features of the DEFINITY G3V3 and
Later, Including DEFINITY ECS
12-8 Issue 7 June 2001
Enter the enable login <login ID> command to re-enable the login ID.
If a login ID is to be dormant for a period of time, the login ID can be disabled
using the
disable login <login ID> command. Entry of this command will disable
the login ID until it is re-enabled using the
enable login <login ID> command.
Administering the Authorization Code
Component
To administer the Authorization Code component of the SVN feature in G3V3 and
later releases, do the following:
1. Access the System Parameter Security form by entering change
system-parameters security
from the command line interface.
2. When the SVN Authorization Code Violation Notification Enabled field is
set to y, the following additional fields appear on the Security-Related
System Parameters form:
 Originating Extension
Enter an unassigned extension that is local to the switch and
conforms to the dial plan, for the purpose of originating and
identifying SVN referral calls for authorization code security
violations.
The originating extension initiates the referral call in the event of an
authorization code security violation. It also sends the appropriate
alerting message or display to the referral destination.
 Referral Destination
Enter an extension assigned to a station or attendant console that
will receive the referral call when an authorization code security
violation occurs.
If the announcement extension field is blank, the referral destination
must be on the switch and a display module is required. Call
vectoring, using time of day routing, allows security notification to be
extended off-premises.
 Authorization Code Threshold
Enter the minimum number of invalid authorization code attempts
that will be permitted before a referral call is made. The value
assigned to this field, in conjunction with the Time Interval field, will
determine whether a security violation has occurred. The system
default for the Authorization Code security violations threshold is 10.