Technical information

Administering Features of the DEFINITY G3V3 and
Later, Including DEFINITY ECS
12-4 Issue 7 June 2001
List the Status of a Login ID
To list the status of a login:
1. Log in to the switch using a login ID with the proper permissions.
2. Enter the command
list login.
A display indicating the status of the specified login will appear. Possible login ID
statuses are:
 disabled — The login was disabled manually using the disable login
command.
 svn-disabled — A security violation was detected for that login and the
login was disabled by the SVN feature.
 active — The login is currently logged in.
 inactive — The login is not logged in.
 void — The password associated with the login has been set to void.
Administering the Remote Access Component
To administer the Remote Access (barrier code) security violation parameters of
the SVN feature, do the following:
1. To access the System Parameter Security form from the command line
interface, enter
change system-parameters security (G3V3 and later) or
change system-parameters (releases prior to G3V3).
2. Enable the Remote Access component of the feature by entering y in the
SVN Remote Access Violation Notification field. When this field is enabled,
the following additional fields appear on the Security-Related System
Parameters form:
 Originating Extension
Enter an unassigned extension that is local to the switch and
conforms to the dial plan, for the purpose of originating and
identifying SVN referral calls for login security violations.
The originating extension initiates the referral call in the event of a
login security violation. It also sends the appropriate alerting
message or display to the referral destination.
 Referral Destination
Enter an extension assigned to a station or attendant console that
will receive the referral call when a security violation occurs. The
referral destination must be equipped with a display module unless
the Announcement Extension has been assigned.
For DEFINITY G3V3 and later, including DEFINITY ECS, call
vectoring using time of day routing allows security notification to be
extended off-premises.