Technical information

Blocking Calls
10-16 Issue 7 June 2001
Blocking ARS Calls on G3
This section contains a sample ARS Digit Analysis Table for G3. In the example,
international and operator-assisted numbers are allowed, but 0700 calls are
denied, as well as high toll destinations to these countries: Colombia, Pakistan,
Jordan, Iraq, Saudi Arabia, United Arab Republic, Israel, Iran, Kuwait, and Puerto
Rico.
Use the following procedure to block calls to the destinations listed in Table 10-1
on page 10-9.
 To access the section of the ARS Digit Analysis Table to be changed, use
change ars analysis (Enter digits between 0-9 “x,” or “X” [“partition”
(1-8)], [“min” (1-23)])
.
 Enter the following data:
a. Dialed String field: Enter the digits to be collected (
0-9, x, or X).
b. Total field: Enter the minimum (
1-23 or blank) and maximum
(
1-23 or blank) number of digits.
c. Route Pattern field: For G3iV1, enter
1-254, r1-r32, blank or
ign (ignore). For G3rV1, G3V1.1 and later releases, enter 1-254,
r1-r32, n/a or den (denied).
d. Call Type field: Enter
fnpa, hnpa, int, iop, natl, op, svc or unk.
ARS DIGIT ANALYSIS TABLE
Partitioned Group Number: 1
Dialed Total Route Call
String Min Max Pat Type
011111op
01 10 23 1 iop
011 10 23 1 int
01157 10 23 int
01192 10 23 int
011962 10 23 int
011964 10 23 int
011965 10 23 int
011966 10 23 int
011971 10 23 int
011972 10 23 int
Continued on next page