System information

DCS Administration
4-18 Issue 1 October 1997
011 Word 1
Add a coverage group with the INTUITY AUDIX system as the coverage point.
Press and .
000 Word 2
Administer the CALL COVERAGE fields.
NOTE:
With early releases of software, Message Retrieval cannot be used to check
LWC status (digital voice terminal display modules).
Press and .
Repeat Word 2 for the next voice terminal.
1. From Worksheet H: Assign the Call Coverage Path for Remote Subscribers.
2. This prevents calls from ringing on the second or third appearance of the
subscriber’s extension number. During testing, calls will forward to the INTUITY
AUDIX system instead of ringing on another appearance.
3. This shows that the last point is an ACD split rather than an extension.
4. From Worksheet G: Assign a Split at the Remote Switch.
1. From Worksheet H: Assign the Call coverage Path for Remote
Subscribers.
2. From Worksheet C: Assign the INTUITY AUDIX Split. Enter the same
number from Procedure 256, Word 1, Field 8 (Intuity AUDIX).
Field Manager II Field Name Enter
1 Call Coverage Group [group #]
1
2 Extension Activity 1
2
7 Coverage Point Indicator 1
3
8 Coverage Point 1 (must be the last
coverage point)
9 Coverage Point Ext/ACD Split/VDN [DCS I
NTUITY AUDIX
system split]
4
Field Manager II Field Name Enter
6 Coverage Group [coverage path]
1
9 LWC Destination 3
10 INTUITY AUDIX [machine #]
2
ADD
EXECUTE
ADD
EXECUTE