System information

Assign a Hop Channel

Issue 1 October 1997

4-13

026 Word 3

Administer ACD split member characteristics.

Press and .

Go to the attendant console (if you are on the customer premises) and Call

Forward the supervisor extension to the I

NTUITY AUDIX system QDN at the remote

location.

Assign a Hop Channel

At the host switch, use the following steps (Table 4-3) to assign a node’s INTUITY

AUDIX system data channel to hop through the host to the I

NTUITY AUDIX system.

1. From Worksheet G: Assign a Split at the Remote Switch.

Field Manager II Field Name Enter

1 ACD Split [DCS I

NTUITY AUDIX

system split]

2 Member 1–63

3 Member Extension [member 0 extension]

Table 4-3. Hop Channel Procedure Overview

Step Procedure Field Manager II Field Name Enter Press

1 258 Word 1 2 Configuration 0 Display

2 257 Word 1 1 Component A — Link

(switch)

DCS host link

2 Component A — Logical

Channel (local port)

DCS channel

3 Component B — Link

(switch)

NTUITY AUDIX

system link

4 Component B — Logical

Channel (local port)

NTUITY AUDIX

system channel

5Priority 1

Continued on next page

ADD EXECUTE