System information

DCS Administration
4-8 Issue 1 October 1997
258 Word 1
Update the DCIU’s on-line translations.
Press and .
258 Word 2
Refresh the DCIU’s scratch pad.
Press and .
Save New Translations
Perform a Run Tape to save the new translations.
If the system has a duplicated common control, the Run Tape operation will
update both tapes.
Assign an ACD Split at the Remote
Switch
Do the procedures in this section (Table 4-2) at the remote switch.
NOTE:
The procedures in this section are unnecessary if the switch uses
vectoring.
When all tie trunks to the host are busy, calls can be routed to the host over
alternate facilities. Calls to an I
NTUITY AUDIX system subscriber that must route to
the I
NTUITY AUDIX system for coverage must use a tie trunk or the subscriber
data will be lost. Make sure these calls stay queued on tie trunks.
In these procedures, use a regular ACD group with only a single member. Call
forward the ACD split to the I
NTUITY AUDIX at the host switch.
Field Manager II Field Name Enter
1 Reboot DCIU 1
Field Manager II Field Name Enter
1 Copy Tables 1
CHANGE
EXECUTE
CHANGE
EXECUTE