System information

Assign a DCS Remote Node
Issue 1 October 1997
4-3
Assign a DCS Remote Node
Use the following steps (Table 4-1) to assign an INTUITY AUDIX system switch
port at the remote node. This switch processor port is assigned to a spare
channel on the DCS link connected to the I
NTUITY AUDIX system host.
Table 4-1. DCS Remote Node Procedure Overview
Step Procedure Field
Manager II Field
Name Enter Press
1 257 Word 5 1
2
3
Port Number
Application Type
Instance Number
switch port (normally 59)
13
I
NTUITY AUDIX system
number (normally 1)
Change
2 257 Word 2 1 Local Port switch port Change
2 Remote Port I
NTUITY AUDIX system
port
3 257 Word 1 1 Component A —
Link (switch)
0Add
2 Component A —
Logical Channel
(local port)
switch port
3 Component B —
Link (switch)
DCS node link
4 Component A —
Logical Channel
(local port)
DCS channel
5Priority 1
6 Alternate Routing
Flag
0
4 350 Word 2 1 Feature 58 Add
2 1st digit [0–9]
3 2nd digit [0–9]
43rd digit [0–9]
5 4th digit [0–9]
Continued on next page