System information

DCS Worksheets
Issue 1 October 1997
2-11
Table 2-6. Worksheet F: Assign a DCS Remote Node
Item Your Entry
DCS Node Link and Channel
Enter the number of the DCIU local port (1–64) on the remote
switch and its logical channel (1–64). The switch’s local port
equals the remote port number and logical channel
administered on the host switch.
DCS Node Number
Enter the DCS node number of the remote switch. This is the
switch number administered on the I
NTUITY AUDIX system.
Local DCIU Port Number to INTUITY AUDIX
Enter the DCIU port number (1–64) connected to the I
NTUITY
AUDIX. This will equal the switch port number administered on
the I
NTUITY system.
Remote DCIU Port Number
Enter the remote DCIU port number (1–64) of the I
NTUITY
AUDIX. This should equal:
■ The logical channel (local port) administered on the Lucent
I
NTUITY system
■ The logical channel on the host link that connects to this
remote node
■ An additional logical channel administered on the host’s
DCIU link to the Lucent I
NTUITY system. This channel hops
signalling from the remote node to the Lucent I
NTUITY
system.
Host Link
Enter the number (1–8) of the DCIU link on the host switch that
will be physically connected to this remote node.
Host Local Port
Enter the DCIU port number (1–64) of the host switch that will
be connected to this remote node. This number must equal:
■ The logical channel on the Lucent INTUITY system assigned
to the remote node
■ The remote DCIU port number and logical channel
administered on this remote node