System information

Switch Integration Planning
2-8 Issue 1 October 1997
Worksheet E: Assign the Call Coverage Path for
Subscribers
Complete this worksheet (Table 2-5) to define call coverage paths for
subscribers.
Table 2-5.
Worksheet E: Assign the Call Coverage Path for
Subscribers
You have completed the worksheets and planning necessary for a Lucent INTUITY
system switch integration. If you do not have a DCS environment, continue with
Chapter 3, ‘‘Switch Administration’’. If you are placing a Lucent I
NTUITY system in
a DCS network, continue with ‘‘DCS Worksheets’’ section below.
Date:
Prepared By:
Contact Telephone Number:
Item Your Entry
COS Number for Subscriber Stations
Enter the number of the Class of Service
subscribers will have.
Call Coverage Group Number
Enter the number of the call coverage group for
subscribers.
Calls Go to Coverage When Appearance 1 is
Busy?
Enter yes if the stations will be analog sets and no if
they will be digital sets.
NOTE:
For testing INTUITY AUDIX stations, telephone
sets are not required. Therefore, this
parameter is optional.