System information

General Switch Integration Planning

Issue 1 October 1997

2-7

Worksheet D: Assign the Data Link

Use this worksheet (Table 2-4) to plan the DCIU (BX.25) data link.

NOTE:

You should regard the values and terms used in the following table as those

used for administering the switch to work with the Lucent I

NTUITY system.

Table 2-4. Worksheet D: Assign the Data Link

Date:

Prepared By:

Contact Telephone Number:

Item Your Entry

Switch Number

Enter the number of the switch to which the Lucent

NTUITY system is connected.

Interface Link Number

Enter the number (1–8) of the DCIU link that will

connect to the Lucent I

NTUITY system.

Local DCIU Port Number to I

NTUITY AUDIX

Enter the DCIU port number (1–64) connected to the

NTUITY AUDIX. This will equal the switch port

number administered on the Lucent I

NTUITY system.

Remote DCIU Port Number (and Logical Channel

on the Lucent I

NTUITY System)

Enter the remote DCIU port number (1–64) of the

NTUITY AUDIX system. This will equal the logical

channel (local port) administered on the Lucent

NTUITY system.

Network Adjunct Number (if Transfer Into AUDIX

is used)

Enter any unused number (1–99) to identify the

NTUITY AUDIX system as a network adjunct.