System information

Switch Integration Planning

2-6 Issue 1 October 1997

Worksheet C: Assign the INTUITY AUDIX Split

The following information (Table 2-3) is required to define a hunt group

(containing the voice port members) for the Lucent I

NTUITY system voice ports.

NOTE:

Only the number of ports actually purchased should be administered in the

hunt group.

Table 2-3. Worksheet C: Assign the INTUITY AUDIX Split

Date:

Prepared By:

Contact Telephone Number:

Item Your Entry

NTUITY AUDIX Machine Number

Enter the number of the I

NTUITY AUDIX you are

administering on the local switch. The recommended

number is 1 on a switch or DCS with a single AUDIX

system.

Trunk Group Number for the I

NTUITY AUDIX Split

Enter the number of the queuing trunk group (1–256) to

carry calls to the I

NTUITY AUDIX split. Normally the first

available trunk group starting from 256 and counting down

is used.

NTUITY AUDIX Split Number

Enter the number of the I

NTUITY AUDIX split.

Extension to Access I

NTUITY AUDIX Split

Enter the split’s Queue Directory Number (QDN) or Vector

Directory Number (VDN).

Vector Number (if vectoring used)

Enter the number of the vector to which the VDN is

assigned and which directs calls to the I

NTUITY AUDIX

system.