System information

General Switch Integration Planning
Issue 1 October 1997
2-3
Worksheet B: Voice Port Extensions and Names
Enter the location, name, and extension for each of the purchased (maximum of
64) voice-ports in the following worksheet (Table 2-2).
Administer the Lucent I
NTUITY system to have no more than four ports per
half-carrier in a traditional module or a universal module that uses TN742s. Eight
ports per TN746B are allowed per half-carrier, with the first four and last four
ports used per circuit pack.
NOTE:
SN228B (required for the AMIS and outcalling features) and SN229 analog
line circuit packs are used in traditional modules.TN742 and TN746B
analog line circuit packs are used in universal modules.
Date:
Prepared By:
Contact Telephone Number:
Table 2-2. Worksheet B: Voice Port Extensions and Names
L
UCENT INTUITY Port Analog Port Equipment Location
1
Name
2
Extension
1 AUDIX 1
2 AUDIX 2
3 AUDIX 3
4 AUDIX 4
5 AUDIX 5
6 AUDIX 6
7 AUDIX 7
8 AUDIX 8
9 AUDIX 9
10 AUDIX 10
11 AUDIX 11
12 AUDIX 12
13 AUDIX 13
14 AUDIX 14
15 AUDIX 15
Continued on next page