System information

Switch Administration for the Lucent INTUITY Lodging
System
A-4 Issue 1 October 1997
To provide such a service:
1. Administer on your switch an extension number that is not associated with
a switch port. (These are often called phantom
or dummy numbers.) This
number is to be used to send voice messages to your subscribers.
2. Configure this number so that the Lucent I
NTUITY hunt group is in its
coverage path for all calls.
3. Assign the service ldg_ni_vmto the new extension.
a. Log in to the Lucent I
NTUITY system as sa or craft.
b. Begin at the Lucent I
NTUITY main menu (Figure 5-1) and select:
The cursor appears in the Called Number field.
c. Enter the called number that was administered on the switch for this
purpose.
d. Move the cursor to Service Name, press , then select
ldg_ni_vm.
e. Press (Save).
The system displays a command-output screen confirming your
choice.
f. Press three times to return to the main menu.
4. If you want the phantom extension to be available from outside your
system, have the extension assigned to a DID number.
5. Give the Lodging voice-mail number to subscribers to your system so they
can send voice mail among themselves.
Call Coverage Path
A coverage path directs the switch to transfer unanswerable calls to a hunt
group, to a service, or to another extension. These may be calls that are
unanswered or calls to a busy extension. When a call goes to coverage, the
switch forwards the called number to the Lucent I
NTUITY system. The Lucent
I
NTUITY system discovers that the called number is administered as a particular
> Assign Number Service
> Number Services
> Voice System Administration
F2
F3
F6